Equivalent & Substitute Parts for T1M-07-F-SH-L

Part Overview

The T1M-07-F-SH-L is a surface mount rectangular connector header manufactured by Samtec Inc. as part of the Micro Mate™ T1M series. This connector is a shrouded, right-angle header with 7 positions at 1.00mm pitch, designed for board-to-cable/wire applications with solder termination. The part is currently active in production with full inventory availability. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and component availability across manufacturing cycles.

Substiute Parts

T1M-07-F-SH-L

Samtec Inc.In Stock: 1302T1M-07-F-SH-L Datasheet

Current PartRFQ

T1M-07-F-SH-L-K

Samtec Inc.In Stock: 5582T1M-07-F-SH-L-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the T1M-07-F-SH-L is determined by strict equivalence across the following critical parameters:

• Connector series and manufacturer (Samtec Inc., Micro Mate™ T1M)
• Number of positions (7)
• Mating pitch (0.039" / 1.00mm)
• Mounting configuration (Surface Mount, Right Angle)
• Shrouding design (Shrouded - 4 Wall)
• Contact type and gender (Male Pin)
• Termination method (Solder)
• Electrical ratings (3.3A per Contact, 250VAC / 353VDC)
• Operating temperature range (-55°C ~ 85°C)
• Compliance certifications (ROHS3, UL94 V-0)

Parts meeting all these criteria are classified as direct substitutes within the same functional group.

Parameter Comparison

Engineering Selection Recommendations

Both T1M-07-F-SH-L and T1M-07-F-SH-L-K are active production parts from Samtec Inc. with identical electrical, mechanical, and environmental specifications. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification. The T1M-07-F-SH-L-K variant includes Pick and Place feature designation, indicating suitability for automated assembly processes. Selection between these parts should be based on manufacturing process requirements and assembly methodology. Both parts are suitable for applications requiring 7-position, 1.00mm pitch surface mount headers with solder termination in the -55°C to 85°C operating range.

Frequently Asked Questions (FAQ)

Q: Can T1M-07-F-SH-L-K be used as a direct replacement for T1M-07-F-SH-L?

A: Yes. Both parts share identical electrical ratings, mechanical dimensions, contact configurations, and environmental specifications. The T1M-07-F-SH-L-K designation includes Pick and Place compatibility, making it suitable for automated assembly environments.

Q: What does the "-K" suffix in T1M-07-F-SH-L-K indicate?

A: The "-K" suffix designates Pick and Place feature compatibility, indicating the part is optimized for automated component placement during manufacturing. This does not affect electrical or mechanical compatibility.

Q: Are the mating pitch and position count identical between these parts?

A: Yes. Both parts feature 7 positions at 0.039" (1.00mm) mating pitch. They are mechanically and electrically interchangeable.

Q: Do both parts meet the same compliance standards?

A: Yes. Both T1M-07-F-SH-L and T1M-07-F-SH-L-K are ROHS3 compliant and carry UL94 V-0 flammability certification. Both have MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the current and voltage rating for these connectors?

A: Both parts are rated for 3.3A per contact with voltage ratings of 250VAC and 353VDC, suitable for low-voltage signal and power distribution applications.

Q: Are these parts suitable for high-temperature applications?

A: Both parts operate within the -55°C to 85°C temperature range. Applications requiring operation outside this range require alternative connector selection.