Samtec T1M-05-T-SV-L-P Equivalent & Substitute Parts

Part Overview

The Samtec T1M-05-T-SV-L-P is a surface mount rectangular connector header from the Micro Mate™ T1M series, featuring 5 positions at 1.00mm pitch with shrouded 4-wall design and solder termination. This connector is classified as obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this connector footprint and electrical specifications.

Substiute Parts

T1M-05-T-SV-L-P

Samtec Inc.In Stock: 984T1M-05-T-SV-L-P Datasheet

Current PartRFQ

T1M-05-F-SV-L-P

Samtec Inc.In Stock: 2090T1M-05-F-SV-L-P Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the T1M-05-T-SV-L-P is determined by the following critical parameters that must remain constant:

• Manufacturer: Samtec Inc.
• Series: Micro Mate™ T1M
• Number of Positions: 5
• Pitch - Mating: 0.039" (1.00mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Surface Mount
• Termination: Solder
• Shrouding: Shrouded - 4 Wall
• Fastening Type: Locking Ramp
• Insulation Material: Liquid Crystal Polymer (LCP)
• Current Rating: 3.3A per Contact
• Voltage Rating: 250VAC, 353VDC
• Operating Temperature: -55°C ~ 85°C
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant

The substitute part T1M-05-F-SV-L-P maintains all critical mechanical and electrical parameters. The primary difference is the contact finish on the mating surface (Gold vs. Tin) and product status (Active vs. Obsolete), which does not affect functional compatibility or footprint requirements.

Parameter Comparison

Engineering Selection Recommendations

The T1M-05-F-SV-L-P is a direct substitute for the obsolete T1M-05-T-SV-L-P. The substitute part maintains identical mechanical compatibility, electrical ratings, and environmental specifications. The substitute part carries Active product status, ensuring ongoing availability and supply chain support. Both parts are ROHS3 compliant and carry UL94 V-0 flammability certification. The contact finish difference (Gold vs. Tin on mating surface) does not affect electrical performance or mechanical fit within the specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Can T1M-05-F-SV-L-P be used as a direct replacement for T1M-05-T-SV-L-P?

A: Yes. Both parts share identical mechanical footprint, pitch, number of positions, mounting type, and electrical ratings. The parts are functionally interchangeable within the specified operating conditions.

Q: What is the difference between the "T" and "F" designations in the part numbers?

A: The "T" in T1M-05-T-SV-L-P indicates Tin contact finish on the mating surface. The "F" in T1M-05-F-SV-L-P indicates Gold contact finish on the mating surface. Both finishes are applied to Phosphor Bronze contacts and do not affect electrical performance or mechanical compatibility.

Q: Why is the main part marked as Obsolete?

A: Product status reflects manufacturer lifecycle classification. The substitute part T1M-05-F-SV-L-P maintains Active status, providing continued availability and support for new designs and production requirements.

Q: Are there packaging differences between these parts?

A: The main part T1M-05-T-SV-L-P does not specify packaging format. The substitute part T1M-05-F-SV-L-P is supplied in Tape & Reel (TR) packaging, which is standard for surface mount production environments.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, carry UL94 V-0 flammability rating, and maintain identical electrical and thermal specifications across the -55°C to 85°C operating temperature range.