T18SP6FF100Q Equivalent & Substitute Parts

Part Overview

The T18SP6FF100Q is a background suppression optical sensor manufactured by Banner Engineering Corporation, designed for 100mm (3.937") sensing distance applications with PNP output configuration. This sensor operates across a 10V to 30V supply voltage range and features infrared (880nm) light source technology with NEMA 6P/IEC IP67/IEC IP69K ingress protection ratings.

The T18SP6FF100Q is classified as obsolete. Locating equivalent or substitute components is necessary to maintain system functionality and ensure continued availability for replacement or new installations where this sensing capability is required.

Substiute Parts

T18SP6FF100Q

Banner Engineering CorporationIn Stock: 913T18SP6FF100Q Datasheet

Current PartRFQ

T18-2VPFF100IR-Q8

Banner Engineering CorporationIn Stock: 909T18-2VPFF100IR-Q8 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the T18SP6FF100Q is determined by the following critical parameters that must remain consistent:

• Sensing Method: Background Suppression technology
• Sensing Distance: 3.937" (100mm)
• Voltage Supply Range: 10V ~ 30V
• Output Configuration: PNP with Dark-ON/Light-ON capability
• Connection Method: Connector-based interface
• Ingress Protection: NEMA 6P/IEC IP67/IEC IP69K ratings
• Operating Temperature Range: -40°C ~ 70°C

The T18-2VPFF100IR-Q8 qualifies as a direct substitute because it maintains all critical parameters within the allowed specifications for this product category. The substitute represents an evolution within the Banner T18 sensor family, offering improved performance characteristics while preserving functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

The T18-2VPFF100IR-Q8 is the qualified substitute for the obsolete T18SP6FF100Q. Both components maintain ROHS3 compliance and MSL Level 1 ratings, ensuring regulatory and environmental compatibility.

The substitute part carries Active product status, providing assured long-term availability and continued manufacturer support. The T18-2VPFF100IR-Q8 delivers improved response time performance (1.5ms versus 3ms) and selectable output configuration options while preserving all critical functional parameters required for direct replacement in existing applications.

Frequently Asked Questions (FAQ)

Q: Can the T18-2VPFF100IR-Q8 directly replace the T18SP6FF100Q in existing installations?

A: Yes. Both sensors maintain identical sensing distance (100mm), voltage supply range (10V ~ 30V), output configuration (PNP), connection method (Connector), and ingress protection ratings (NEMA 6P/IEC IP67/IEC IP69K). The substitute operates within the same temperature range (-40°C ~ 70°C).

Q: What are the differences between these two sensors?

A: The T18-2VPFF100IR-Q8 offers faster response time (1.5ms versus 3ms), selectable output configuration capability, and operates at a slightly different infrared wavelength (870nm versus 880nm). The substitute represents an active product with ongoing manufacturer support, whereas the original is obsolete.

Q: Are there packaging differences between these parts?

A: The T18-2VPFF100IR-Q8 is supplied in Box packaging. Both sensors use connector-based connection methods and maintain identical mechanical and electrical interface specifications.

Q: Do both sensors meet the same compliance standards?

A: Yes. Both the T18SP6FF100Q and T18-2VPFF100IR-Q8 are ROHS3 compliant with MSL Level 1 ratings. Both carry identical ingress protection certifications (NEMA 6P, IEC IP67, IEC IP69K).

Q: Is the infrared wavelength difference (880nm versus 870nm) significant for substitution?

A: Both wavelengths fall within the infrared spectrum and are functionally equivalent for background suppression sensing applications. The wavelength difference does not affect the substitution validity based on the allowed electrical and mechanical parameters for this product category.