SY10EP89VZC-TR Equivalent & Substitute Parts

Part Overview

The SY10EP89VZC-TR is a 2/0 Driver IC manufactured by Microchip Technology in an 8-SOIC surface mount package. This part is discontinued at DiGi Electronics, making identification of functionally equivalent alternatives essential for ongoing design support and production continuity. The device operates at 3.3V and 5V supply voltages and is classified as RoHS non-compliant with unlimited moisture sensitivity rating.

Substiute Parts

SY10EP89VZC-TR

Microchip TechnologyIn Stock: 858SY10EP89VZC-TR Datasheet

Current PartRFQ

MC10EL89DR2G

onsemiIn Stock: 1310MC10EL89DR2G Datasheet

MFR RecommendedRFQ

MC10EP11DG

onsemiIn Stock: 3311MC10EP11DG Datasheet

MFR RecommendedRFQ

MC10EP11DR2G

onsemiIn Stock: 2258MC10EP11DR2G Datasheet

MFR RecommendedRFQ

MC10EP89DG

onsemiIn Stock: 2073MC10EP89DG Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the SY10EP89VZC-TR is determined by the following critical parameters: package type (8-SOIC), mounting method (surface mount), supply voltage compatibility, and functional classification (driver IC). The substitute parts listed below maintain the same physical footprint and electrical interface requirements, enabling direct replacement in existing designs.

The primary substitutes are categorized as follows:

Driver Category Substitutes: MC10EP89DG and MC10EL89DR2G maintain the driver function with compatible packaging and voltage specifications.

Clock/Timing Category Substitutes: MC10EP11DG and MC10EP11DR2G are clock buffer distribution ICs that share the same 8-SOIC package and voltage supply range, offering functional alternatives for timing-critical applications.

All substitute parts use the identical 8-SOIC (0.154", 3.90mm Width) package, ensuring mechanical compatibility without PCB redesign.

Parameter Comparison

Engineering Selection Recommendations

MC10EP89DG is the primary substitute for driver applications. This part is manufactured by onsemi, maintains active product status, and achieves ROHS3 compliance. The supply voltage range of 3V ~ 5.5V encompasses the original 3.3V and 5V specifications. Tube packaging is available.

MC10EL89DR2G is an alternative driver substitute with active status and ROHS3 compliance. The supply voltage range of 4.2V ~ 5.7V covers the 5V specification but requires verification for 3.3V applications. Tape & Reel packaging is available with higher inventory levels (1282 pcs).

MC10EP11DG and MC10EP11DR2G are clock buffer distribution ICs suitable for timing-critical applications requiring the same 8-SOIC package footprint. Both parts are active, ROHS3 compliant, and offer extended frequency capability (3 GHz maximum). MC10EP11DR2G is available in Tape & Reel packaging with higher inventory (2236 pcs), while MC10EP11DG is available in Tube packaging (3232 pcs).

All substitute parts are ROHS3 compliant, addressing the non-compliance status of the original part. Selection should prioritize active product status and supply voltage compatibility with the target application.

Frequently Asked Questions (FAQ)

Q: Can MC10EP89DG directly replace SY10EP89VZC-TR in existing designs?

A: Yes, MC10EP89DG is a direct functional substitute. Both parts are driver ICs in 8-SOIC packages with compatible supply voltage ranges (3V ~ 5.5V covers 3.3V and 5V). No PCB modifications are required.

Q: What is the difference between MC10EP89DG and MC10EL89DR2G?

A: Both are driver ICs in 8-SOIC packages with active product status. MC10EP89DG has a supply voltage range of 3V ~ 5.5V, while MC10EL89DR2G operates at 4.2V ~ 5.7V. MC10EP89DG is preferred for 3.3V applications. Packaging differs: MC10EP89DG is supplied in Tube, while MC10EL89DR2G is supplied in Tape & Reel.

Q: Are MC10EP11DG and MC10EP11DR2G suitable substitutes for the SY10EP89VZC-TR?

A: These parts are clock buffer distribution ICs rather than drivers, placing them in a different functional category. However, they share the identical 8-SOIC package and compatible supply voltage ranges. Selection depends on application requirements for clock distribution versus general driver functionality.

Q: What is the packaging difference between the substitute parts?

A: MC10EP89DG and MC10EP11DG are supplied in Tube packaging. MC10EL89DR2G and MC10EP11DR2G are supplied in Tape & Reel (TR) packaging. Both packaging formats are suitable for surface mount assembly; selection depends on production volume and handling requirements.

Q: Do all substitute parts meet RoHS compliance requirements?

A: Yes, all listed substitute parts are ROHS3 compliant. The original SY10EP89VZC-TR is RoHS non-compliant, so substitution provides compliance improvement for new designs or production runs.

Q: What is the moisture sensitivity level for substitute parts?

A: All substitute parts have Moisture Sensitivity Level (MSL) 1 (Unlimited), matching the original part specification. No additional moisture control measures are required during handling or storage.