SY10EL16VCZI-TR Equivalent & Substitute Parts

Part Overview

The SY10EL16VCZI-TR is a differential receiver IC manufactured by Microchip Technology, designed for 5V/3.3V logic applications in an 8-SOIC surface mount package. This component is classified as a discontinued product at DiGi Electronics, necessitating identification of active equivalent alternatives to maintain supply chain continuity. The part operates across a temperature range of -40°C to 85°C and is RoHS non-compliant with unlimited moisture sensitivity rating.

Substiute Parts

SY10EL16VCZI-TR

Microchip TechnologyIn Stock: 1011SY10EL16VCZI-TR Datasheet

Current PartRFQ

MC10EL16DG

onsemiIn Stock: 1833MC10EL16DG Datasheet

MFR RecommendedRFQ

MC10EL16DR2G

onsemiIn Stock: 3483MC10EL16DR2G Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SY10EL16VCZI-TR is determined by the following critical parameters:

• Logic Type: Must be Differential Receiver
• Package / Case: Must be 8-SOIC (0.154", 3.90mm Width)
• Number of Bits: Must be 1
• Mounting Type: Must be Surface Mount
• Operating Temperature Range: Must support -40°C to 85°C minimum
• Base Product Number: Must be 10EL16 series

The identified substitute parts MC10EL16DG and MC10EL16DR2G from onsemi satisfy all substitution criteria. Both parts maintain identical logic functionality, package specifications, and thermal operating range. The primary distinction between substitutes is packaging format: MC10EL16DG is supplied in Tube packaging, while MC10EL16DR2G is supplied in Tape & Reel (TR) format.

Parameter Comparison

Engineering Selection Recommendations

Both MC10EL16DG and MC10EL16DR2G are active products from onsemi and represent direct functional equivalents to the discontinued SY10EL16VCZI-TR. The onsemi substitutes provide ROHS3 compliance, addressing regulatory requirements not met by the original Microchip part.

MC10EL16DR2G is the preferred selection when Tape & Reel packaging is required for automated assembly processes, maintaining the same packaging format as the original part.

MC10EL16DG is suitable for applications where Tube packaging is acceptable, offering equivalent electrical and thermal performance with higher current inventory availability.

Both substitutes operate within the same temperature envelope and maintain identical pin configuration and package footprint, enabling direct board-level replacement without design modification.

Frequently Asked Questions (FAQ)

Q: Can MC10EL16DG and MC10EL16DR2G be used interchangeably with SY10EL16VCZI-TR?

A: Yes. Both onsemi parts are functional equivalents. The electrical specifications, package dimensions, pin configuration, and operating temperature range are identical. Selection between them depends on packaging format requirements: MC10EL16DR2G for Tape & Reel applications, MC10EL16DG for Tube packaging.

Q: What is the difference between the two substitute parts?

A: MC10EL16DG and MC10EL16DR2G are electrically and mechanically identical. The sole difference is packaging format: MC10EL16DG is supplied in Tube packaging, while MC10EL16DR2G is supplied in Tape & Reel (TR) format. Selection should be based on assembly process requirements.

Q: Are there any voltage compatibility concerns when substituting?

A: The original SY10EL16VCZI-TR operates at 3.3V and 5V. The onsemi substitutes operate at 4.2V to 5.7V, which encompasses the 5V operating point. For 3.3V applications, verify that the 4.2V minimum supply voltage specification is compatible with your circuit design.

Q: Do the substitute parts require any PCB layout changes?

A: No. Both MC10EL16DG and MC10EL16DR2G use the identical 8-SOIC package footprint as the original part, enabling direct PCB replacement without layout modification.

Q: What is the inventory status of these substitutes?

A: MC10EL16DG has 1,778 pieces in stock. MC10EL16DR2G has 3,381 pieces in stock. Both are active products with established supply availability.