SWT-1.26-112 Equivalent & Substitute Parts

Part Overview

The SWT-1.26-112 is a 112 µH unshielded toroidal inductor manufactured by Amgis, LLC, rated for 1.26 A with 300mOhm DC resistance. This through-hole component operates across -40°C to 125°C and is ROHS3 compliant. The part is currently active in production with 1101 units in stock. Substitute parts are identified when equivalent electrical specifications and core material properties align with application requirements, enabling procurement flexibility and supply chain continuity.

Substiute Parts

SWT-1.26-112

Amgis, LLCIn Stock: 1125SWT-1.26-112 Datasheet

Current PartRFQ

SH150T-1.26-112

Amgis, LLCIn Stock: 1171SH150T-1.26-112 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The SH150T-1.26-112 qualifies as a direct substitute based on the following critical parameters:

• Inductance value: 112 µH (identical)
• Inductance tolerance: ±20% (identical)
• Current rating: 1.26 A (identical)
• DC resistance: 300mOhm (identical)
• Core material: Iron Powder (identical)
• Shielding classification: Unshielded (identical)
• Mounting type: Through Hole (identical)
• Operating temperature range: -40°C to 125°C (identical)
• Test frequency: 10 kHz (identical)
• Regulatory compliance: ROHS3 Compliant (identical)

The primary difference between these parts is the package configuration: SWT-1.26-112 uses radial horizontal open terminals, while SH150T-1.26-112 uses radial horizontal corner terminals. Both are supplied by the same manufacturer and maintain equivalent electrical performance.

Parameter Comparison

Engineering Selection Recommendations

Both SWT-1.26-112 and SH150T-1.26-112 are active production components from Amgis, LLC with identical electrical specifications and regulatory compliance. Selection between these parts depends on PCB layout requirements and terminal configuration compatibility. The SWT-1.26-112 features open radial terminals with a footprint of 15.00mm x 15.00mm and 8.80mm seated height. The SH150T-1.26-112 provides corner terminal configuration with a slightly larger footprint of 15.60mm x 15.00mm and 9.10mm seated height. Both parts maintain ROHS3 compliance and REACH unaffected status. Packaging differs between bulk (SWT-1.26-112) and tray (SH150T-1.26-112) formats, which may influence procurement and assembly processes.

Frequently Asked Questions (FAQ)

Q: Can SH150T-1.26-112 replace SWT-1.26-112 in my circuit?

A: Yes, provided your PCB layout accommodates the corner terminal configuration and the slightly larger physical dimensions (15.60mm x 15.00mm versus 15.00mm x 15.00mm). All electrical parameters—inductance, current rating, DC resistance, and operating temperature range—are identical.

Q: What is the primary difference between these two parts?

A: The terminal configuration differs. SWT-1.26-112 uses open radial terminals, while SH150T-1.26-112 uses corner terminals. Physical dimensions vary slightly as a result. Electrical performance is equivalent.

Q: Are both parts ROHS3 compliant?

A: Yes, both SWT-1.26-112 and SH150T-1.26-112 are ROHS3 compliant and REACH unaffected.

Q: Does packaging format affect electrical performance?

A: No. SWT-1.26-112 is supplied in bulk packaging, while SH150T-1.26-112 is supplied in tray packaging. Packaging format does not affect component electrical specifications or performance.

Q: What is the inductance tolerance for both parts?

A: Both parts have an inductance tolerance of ±20% at the 10 kHz test frequency.