SWC-3.00-17 Equivalent & Substitute Parts

Part Overview

The SWC-3.00-17 is a 17 µH unshielded toroidal inductor manufactured by Amgis, LLC, rated for 3 A continuous current with 50mOhm DC resistance. This through-hole component operates across -40°C to 125°C and is designed for applications requiring fixed inductance in compact radial, vertical configurations. The part maintains Active product status with ROHS3 compliance and full inventory availability. Substitute parts are identified when electrical specifications, mechanical dimensions, and compliance certifications remain equivalent across different packaging formats or series designations.

Substiute Parts

SWC-3.00-17

Amgis, LLCIn Stock: 704SWC-3.00-17 Datasheet

Current PartRFQ

SH150C-3.00-17

Amgis, LLCIn Stock: 1016SH150C-3.00-17 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The SH150C-3.00-17 qualifies as a direct substitute based on identical electrical and mechanical specifications. Substitution is valid when the following parameters match the main part:

• Inductance value: 17 µH
• Inductance tolerance: ±20%
• Current rating: 3 A
• DC resistance: 50mOhm
• Core material: Iron Powder
• Shielding classification: Unshielded
• Operating temperature range: -40°C ~ 125°C
• Mounting type: Through Hole
• Package configuration: Radial, Vertical (Open)
• Inductance test frequency: 10 kHz

The primary difference between these parts is packaging format (Bulk versus Tray) and series designation (SW versus SH150), which do not affect electrical performance or functional compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both SWC-3.00-17 and SH150C-3.00-17 are Active products with identical ROHS3 and REACH compliance certifications. Selection between these parts is determined by packaging requirements and supply chain logistics rather than electrical performance. The SWC-3.00-17 is supplied in Bulk packaging, while the SH150C-3.00-17 is supplied in Tray packaging. Both parts meet all regulatory requirements for industrial and commercial applications within the specified operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can SH150C-3.00-17 replace SWC-3.00-17 in existing designs?

A: Yes. Both parts have identical electrical specifications (17 µH, 3 A, 50mOhm DCR) and mechanical dimensions. The only difference is packaging format and series designation, which do not affect circuit performance.

Q: What is the difference between Bulk and Tray packaging?

A: Bulk packaging is used for loose component quantities, while Tray packaging provides organized component arrangement for automated assembly processes. Electrical and mechanical specifications remain identical.

Q: Are both parts RoHS compliant?

A: Yes. Both SWC-3.00-17 and SH150C-3.00-17 are ROHS3 Compliant and REACH Unaffected, meeting current environmental regulations.

Q: What is the physical size difference between these parts?

A: Both parts share identical length and width dimensions (0.580" L x 0.340" W / 14.73mm x 8.64mm). The seated height differs: SWC-3.00-17 is 0.340" (8.64mm), while SH150C-3.00-17 is 0.690" (17.53mm). This height difference must be considered for PCB layout and clearance requirements.

Q: Can these parts be used interchangeably in high-frequency applications?

A: Both parts are tested at 10 kHz inductance frequency. Applications requiring operation at significantly different frequencies should be evaluated based on actual circuit requirements and frequency-dependent performance characteristics.