SWC-3.00-110 Equivalent & Substitute Parts

Part Overview

The SWC-3.00-110 is a 110 µH unshielded toroidal inductor manufactured by Amgis, LLC, rated for 3 A continuous current with 90mOhm DC resistance. This through-hole component operates across the industrial temperature range of -40°C to 125°C and is ROHS3 compliant. The part is currently active in production with 608 units in stock. Substitute parts are identified when electrical specifications, mechanical dimensions, and compliance certifications remain identical across different packaging configurations or series designations.

Substiute Parts

SWC-3.00-110

Amgis, LLCIn Stock: 718SWC-3.00-110 Datasheet

Current PartRFQ

SH150C-3.00-110

Amgis, LLCIn Stock: 1569SH150C-3.00-110 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The SH150C-3.00-110 qualifies as a direct substitute for the SWC-3.00-110 based on identical electrical and mechanical specifications. Substitution is valid when the following parameters match exactly:

• Inductance value: 110 µH
• Inductance tolerance: ±20%
• Current rating: 3 A
• DC resistance: 90mOhm
• Core material: Iron Powder
• Shielding configuration: Unshielded
• Mounting type: Through Hole
• Physical dimensions: 0.949" L x 0.598" W (24.10mm x 15.20mm)
• Seated height: 1.059" (26.90mm)
• Operating temperature range: -40°C ~ 125°C
• RoHS compliance: ROHS3 Compliant

The primary difference between these parts is the packaging format (Bulk versus Tray) and series designation (SW versus SH150), which do not affect electrical performance or mechanical fit in the application circuit.

Parameter Comparison

Engineering Selection Recommendations

Both SWC-3.00-110 and SH150C-3.00-110 are active production components from Amgis, LLC with identical electrical performance and mechanical compatibility. Selection between these parts should be based on packaging requirements and inventory availability. The SH150C-3.00-110 offers higher stock levels (1530 units versus 608 units) and is supplied in Tray packaging, which may be preferred for automated assembly processes. The SWC-3.00-110 is available in Bulk packaging. Both parts maintain full ROHS3 compliance and REACH unaffected status, meeting regulatory requirements for industrial and commercial applications.

Frequently Asked Questions (FAQ)

Q: Can SH150C-3.00-110 be used as a direct replacement for SWC-3.00-110 in existing designs?

A: Yes. The SH150C-3.00-110 is electrically and mechanically identical to the SWC-3.00-110. All critical parameters including inductance, current rating, DC resistance, dimensions, and operating temperature range are identical. The parts are interchangeable at the circuit level.

Q: What is the difference between these two part numbers?

A: The primary differences are packaging format (Bulk versus Tray) and series designation (SW versus SH150). These differences do not affect electrical performance or physical fit in the application.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical RoHS3 compliance, REACH unaffected status, and EAR99 export classification. Regulatory compliance is equivalent.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection may be based on packaging preference and inventory availability. The SH150C-3.00-110 currently has higher stock levels.

Q: Do these parts have different moisture sensitivity levels?

A: The SWC-3.00-110 lists MSL as Not Applicable, while the SH150C-3.00-110 lists MSL as 1 (Unlimited). Both designations indicate no moisture sensitivity restrictions for storage and handling.