STX13005G-AP Equivalent & Substitute Parts

Part Overview

The STX13005G-AP is a Bipolar (BJT) NPN transistor manufactured by STMicroelectronics, rated for 400 V collector-emitter breakdown voltage and 3 A maximum collector current. This component is packaged in a TO-92AP through-hole configuration with a maximum power dissipation of 2.8 W. The part is classified as Obsolete, necessitating identification of equivalent substitute components for ongoing design support and procurement continuity.

Substiute Parts

STX13005G-AP

STMicroelectronicsIn Stock: 1018STX13005G-AP Datasheet

Current PartRFQ

STX13005-APH

STMicroelectronicsIn Stock: 67112STX13005-APH Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the STX13005G-AP is determined by electrical and mechanical parameter equivalence within the NPN BJT transistor category. The critical parameters governing substitution are:

• Transistor Type: NPN configuration
• Current Rating: 3 A maximum collector current
• Voltage Rating: 400 V collector-emitter breakdown voltage
• Saturation Characteristics: 5V @ 750mA, 3A
• Cutoff Current: 1mA maximum
• Current Gain: 8 @ 2A, 5V minimum
• Power Dissipation: 2.8 W maximum
• Package Configuration: TO-92AP through-hole mounting
• Compliance: ROHS3 compliant, REACH unaffected

Substitute parts must match all electrical specifications and maintain through-hole TO-92AP package compatibility. Packaging format (Cut Tape versus other formats) does not affect electrical substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

The STX13005-APH serves as a direct electrical and mechanical substitute for the STX13005G-AP. Both components share identical electrical specifications across all critical parameters: 3 A collector current, 400 V breakdown voltage, 2.8 W power rating, and TO-92AP package configuration.

The primary distinction between these parts is product lifecycle status. The STX13005G-AP is classified as Obsolete, while the STX13005-APH carries Last Time Buy status, indicating extended availability for procurement. Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for new designs and legacy system support.

Selection of STX13005-APH is appropriate for applications currently utilizing STX13005G-AP, with no circuit redesign or board layout modification required. The parts are pin-compatible and electrically interchangeable within the specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Can STX13005-APH replace STX13005G-AP in existing designs?

A: Yes. The STX13005-APH is electrically and mechanically equivalent to the STX13005G-AP. All electrical parameters, including collector current, breakdown voltage, saturation characteristics, and power dissipation, are identical. The TO-92AP package configuration ensures pin compatibility without circuit modification.

Q: What is the difference between STX13005G-AP and STX13005-APH?

A: The components are electrically identical. The difference is packaging format and product lifecycle status. STX13005G-AP is Obsolete; STX13005-APH is Last Time Buy. STX13005-APH is supplied in Cut Tape packaging, while STX13005G-AP packaging format is not specified in available data.

Q: Are there any compliance differences between these parts?

A: No. Both STX13005G-AP and STX13005-APH are ROHS3 compliant and REACH unaffected. Both carry EAR99 export classification and identical HTSUS codes.

Q: What are the critical electrical parameters for substitution?

A: Substitution eligibility is determined by: NPN transistor type, 3 A maximum collector current, 400 V collector-emitter breakdown voltage, 5V saturation voltage at specified conditions, 1mA cutoff current, 8 minimum current gain at 2A/5V, and 2.8 W maximum power dissipation.

Q: Is the TO-92AP package compatible with standard TO-92 footprints?

A: The STX13005G-AP and STX13005-APH are both specified for TO-92AP through-hole mounting with TO-226-3 and TO-92-3 package designations. Compatibility with existing TO-92 footprints is determined by board design specifications and mechanical clearance requirements.