STTA1206D Equivalent & Substitute Parts

Part Overview

The STTA1206D is a general-purpose rectifier diode manufactured by STMicroelectronics, rated for 600 V DC reverse voltage and 12 A average rectified current in a TO-220AC through-hole package. This device is part of the TURBOSWITCH™ series and features fast recovery characteristics with a reverse recovery time of 55 ns. The STTA1206D is classified as obsolete, making equivalent and substitute parts necessary for new designs and ongoing production requirements. Substitute parts must maintain electrical compatibility across voltage, current, and thermal specifications while accommodating available packaging and product status constraints.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	600	V
Current - Average Rectified (Io)	12	A
Voltage - Forward (Vf) (Max) @ If	1.75 V @ 12 A	V
Reverse Recovery Time (trr)	55	ns
Current - Reverse Leakage @ Vr	100	µA @ 600 V
Mounting Type	Through Hole	-
Package / Case	TO-220-2	-
Operating Temperature - Junction (Max)	150	°C
Speed Classification	Fast Recovery ≤ 500ns, > 200mA (Io)	-
RoHS Status	ROHS3 Compliant	-

Substitute Part Grouping Explanation

Substitution logic for the STTA1206D is based on the following critical parameters:

Primary Compatibility Criteria:

Voltage - DC Reverse (Vr) (Max): 600 V minimum
Mounting Type: Through Hole
Package / Case: TO-220-2 or TO-220AC compatible
Speed Classification: Fast Recovery ≤ 500ns, > 200mA (Io)

Current Rating Considerations: Substitute parts are grouped into three categories based on average rectified current (Io):

Direct Current Match (12 A): STTH12R06D provides identical 12 A rating with active product status and improved thermal performance (175°C junction temperature vs. 150°C).
Lower Current Rating (3-6 A): LQA03TC600, QH03TZ600, and LXA06T600 are suitable for applications where the full 12 A capacity is not required. These parts maintain 600 V voltage rating and fast recovery characteristics but operate at reduced current levels.
Higher Current Rating (15 A): MUR1560G exceeds the 12 A requirement and provides additional current capacity margin for designs requiring higher current handling.

All substitute parts maintain TO-220-2 or TO-220AC package compatibility, fast recovery speed classification, and 600 V reverse voltage rating. Reverse recovery time, forward voltage drop, and reverse leakage current vary across substitutes and must be evaluated against specific circuit requirements.

Parameter Comparison

Parameter	STTA1206D	STTH12R06D	MUR1560G	LXA06T600	LQA03TC600	QH03TZ600
Manufacturer	STMicroelectronics	STMicroelectronics	onsemi	Power Integrations	Power Integrations	Power Integrations
Voltage - DC Reverse (Vr) (Max)	600 V	600 V	600 V	600 V	600 V	600 V
Current - Average Rectified (Io)	12 A	12 A	15 A	6 A	3 A	3 A
Voltage - Forward (Vf) (Max) @ If	1.75 V @ 12 A	2.9 V @ 12 A	1.5 V @ 15 A	2.94 V @ 6 A	3.1 V @ 3 A	3 V @ 3 A
Reverse Recovery Time (trr)	55 ns	45 ns	60 ns	23 ns	13 ns	9.8 ns
Current - Reverse Leakage @ Vr	100 µA @ 600 V	45 µA @ 600 V	10 µA @ 600 V	250 µA @ 600 V	20 µA @ 600 V	250 µA @ 600 V
Speed Classification	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	TO-220-2	TO-220-2	TO-220-2	TO-220-2	TO-220-2	TO-220-2
Operating Temperature - Junction (Max)	150°C	175°C	175°C	150°C	150°C	150°C
Product Status	Obsolete	Active	Active	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant

Engineering Selection Recommendations

STTH12R06D (STMicroelectronics) is the primary substitute for the STTA1206D. This part maintains identical voltage and current ratings (600 V, 12 A) with the same TO-220AC package configuration. STTH12R06D is classified as active product status, ensuring long-term availability and supply chain continuity. The device features improved reverse recovery time (45 ns vs. 55 ns) and lower reverse leakage current (45 µA vs. 100 µA). Operating temperature rating increases to 175°C, providing enhanced thermal margin. ROHS3 compliance is maintained. This substitute is suitable for direct replacement in existing designs without circuit modification.

MUR1560G (onsemi) serves as an alternative for applications requiring higher current capacity. With a 15 A rating, this part provides 25% additional current margin over the STTA1206D while maintaining 600 V voltage rating and TO-220-2 package compatibility. MUR1560G exhibits superior forward voltage characteristics (1.5 V @ 15 A) and the lowest reverse leakage current (10 µA @ 600 V) among all substitutes. Operating temperature range extends to 175°C. ROHS3 compliance is confirmed. This substitute is appropriate for designs where increased current headroom is beneficial.

LXA06T600 (Power Integrations) and LQA03TC600 (Power Integrations) are suitable for applications where the full 12 A capacity is not required. Both maintain 600 V voltage rating, fast recovery characteristics, and TO-220AC package compatibility. LXA06T600 provides 6 A capacity with 23 ns reverse recovery time, while LQA03TC600 provides 3 A capacity with 13 ns reverse recovery time. These parts are classified as active product status with RoHS compliance. Selection between these options depends on actual circuit current requirements.

QH03TZ600 (Power Integrations) is a 3 A rated alternative with the fastest reverse recovery time (9.8 ns) and specified capacitance parameter (11 pF @ 10V, 1MHz). This part is suitable for low-current applications requiring minimal switching losses. Active product status and RoHS compliance are confirmed.

All substitute parts maintain compliance with REACH regulations and EAR99 export classification. Selection should be based on specific circuit current requirements, thermal constraints, and switching loss considerations.

Frequently Asked Questions (FAQ)

Q: Can STTH12R06D directly replace STTA1206D without circuit modifications?

A: Yes. STTH12R06D maintains identical voltage (600 V) and current (12 A) ratings with compatible TO-220AC packaging. Both devices are fast recovery rectifiers with similar electrical characteristics. The primary differences are improved reverse recovery time (45 ns vs. 55 ns), lower reverse leakage current (45 µA vs. 100 µA), and higher junction temperature rating (175°C vs. 150°C). These improvements are beneficial for circuit performance and thermal management.

Q: What is the difference between TO-220-2 and TO-220AC packaging?

A: TO-220-2 and TO-220AC are compatible package designations for two-terminal through-hole diodes. Both refer to the same physical form factor with identical pin spacing and mounting characteristics. The designations reflect different supplier or manufacturer naming conventions but represent functionally equivalent packages suitable for the same PCB layouts.

Q: Can lower-current substitutes (LQA03TC600, QH03TZ600) be used in place of STTA1206D?

A: Lower-current substitutes are suitable only if the actual circuit current requirement does not exceed the substitute part's rating. LQA03TC600 and QH03TZ600 are rated for 3 A, while LXA06T600 is rated for 6 A. If the circuit requires the full 12 A capacity of STTA1206D, these lower-rated parts will not function properly and may fail. Circuit analysis must confirm that peak and average current demands remain within the substitute part's specifications.

Q: Why does MUR1560G have lower forward voltage (1.5 V @ 15 A) compared to STTA1206D (1.75 V @ 12 A)?

A: Forward voltage characteristics vary based on semiconductor material properties, doping profiles, and junction design. MUR1560G exhibits superior forward voltage performance at its rated current, resulting in lower power dissipation and reduced thermal generation. This is an advantage for high-current applications where efficiency is critical.

Q: Are all substitute parts RoHS compliant?

A: Yes. STTH12R06D and MUR1560G are ROHS3 compliant. LXA06T600, LQA03TC600, and QH03TZ600 are RoHS compliant. All parts meet environmental and hazardous substance restrictions applicable to electronic components.

Q: What is reverse recovery time and why does it vary among substitutes?

A: Reverse recovery time (trr) is the interval required for a diode to transition from forward conduction to reverse blocking when the applied voltage reverses. Shorter reverse recovery times reduce switching losses and electromagnetic interference in high-frequency applications. Substitutes range from 9.8 ns (QH03TZ600) to 60 ns (MUR1560G). Selection depends on circuit switching frequency and efficiency requirements.

Q: Can STTA1206D be used in new designs, or must substitutes be selected?

A: STTA1206D is classified as obsolete product status, indicating that STMicroelectronics no longer manufactures or supports this part. New designs should select from active substitute parts to ensure long-term availability, supply chain stability, and manufacturer technical support. STTH12R06D is the recommended primary choice for new designs requiring identical electrical specifications.

Q: What is the significance of reverse leakage current differences among substitutes?

A: Reverse leakage current represents the small current flowing through the diode when reverse voltage is applied. Lower leakage current reduces standby power consumption and heat generation in idle states. MUR1560G exhibits the lowest leakage (10 µA @ 600 V), while LXA06T600 and QH03TZ600 exhibit higher leakage (250 µA @ 600 V). For battery-powered or low-power applications, lower leakage is advantageous.

Q: Are there inventory considerations when selecting substitutes?

A: Yes. Inventory levels vary significantly among substitutes. STTH12R06D has 31,400 pieces in stock, MUR1560G has 29,300 pieces, and LQA03TC600 has 16,921 pieces. QH03TZ600 has the lowest inventory at 2,100 pieces. For production planning and supply chain continuity, parts with higher inventory levels provide greater availability assurance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message