STS260PC Equivalent & Substitute Parts

Part Overview

The STS260PC is a slide switch manufactured by TE Connectivity ALCOSWITCH Switches, configured as a DP6T (double pole, six throw) switch rated for 300mA AC at 125V. This through-hole mounted component features epoxy sealed terminals and is designed for applications requiring multi-position switching functionality.

The STS260PC is classified as obsolete. Locating equivalent substitute parts is necessary to support ongoing maintenance, repair, and new design requirements where this component is specified or functionally required.

Substiute Parts

STS260PC

TE Connectivity ALCOSWITCH SwitchesIn Stock: 1035STS260PC Datasheet

Current PartRFQ

1825163-5

TE Connectivity ALCOSWITCH SwitchesIn Stock: 9241825163-5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the STS260PC is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must match the following criteria:

Electrical Parameters:

• Circuit configuration: DP6T
• Current rating: 300mA AC
• Voltage rating: 125V AC
• Contact timing: Shorting (MBB)

Mechanical Parameters:

• Mounting type: Through Hole
• Termination style: PC Pin
• Actuator type: Standard
• Actuator length: 4.00mm
• Switch travel: 2.50mm
• Operating force: 250gf

Physical Characteristics:

• Contact material: Copper Alloy
• Contact finish: Silver
• Operating temperature range: -10°C to 60°C
• Mechanical life: 10,000 Cycles

The substitute part 1825163-5 meets all specified parameters and is manufactured by the same supplier, TE Connectivity ALCOSWITCH Switches, within the same STS product series.

Parameter Comparison

Engineering Selection Recommendations

The part 1825163-5 is a direct functional equivalent to the STS260PC. All electrical and mechanical parameters are identical. The primary distinction is product status: the STS260PC is obsolete while 1825163-5 is active and currently manufactured.

Selection of 1825163-5 is appropriate for:

• Direct replacement in existing designs where STS260PC is specified
• New designs requiring DP6T slide switch functionality at 300mA, 125V AC
• Applications requiring through-hole PC pin termination with epoxy sealed terminals
• Environments within the -10°C to 60°C operating temperature range

The substitute part maintains full compatibility with printed circuit board layouts, connector interfaces, and electrical performance requirements of the original STS260PC specification.

Frequently Asked Questions (FAQ)

Q: Can 1825163-5 be used as a direct replacement for STS260PC in existing circuit boards?

A: Yes. The 1825163-5 is mechanically and electrically identical to the STS260PC. Pin configuration, mounting hole spacing, actuator dimensions, and electrical ratings are equivalent. No circuit board modifications are required.

Q: What is the primary reason to substitute STS260PC with 1825163-5?

A: The STS260PC is obsolete and no longer manufactured. The 1825163-5 is an active product from the same manufacturer with identical specifications, ensuring continued availability for repair and maintenance applications.

Q: Are there any compliance or certification differences between these parts?

A: The STS260PC is RoHS non-compliant. The 1825163-5 has RoHS status listed as not applicable. Both parts share the same ECCN (EAR99) and HTSUS (8536.50.9050) classifications. Compliance requirements should be evaluated based on end-application and regional regulations.

Q: Do both parts have the same electrical performance characteristics?

A: Yes. Both parts are rated for 300mA AC at 125V, feature DP6T circuit configuration with shorting (MBB) contact timing, and support 10,000 mechanical cycles. Operating temperature range, contact material, and contact finish are identical.

Q: Is the actuator length the same on both parts?

A: Yes. Both the STS260PC and 1825163-5 have a 4.00mm actuator length with 2.50mm switch travel and 250gf operating force.

Q: Can these parts be used interchangeably in new designs?

A: Yes. The 1825163-5 meets all functional and dimensional requirements of the STS260PC. New designs should specify 1825163-5 as it is an active product with ongoing manufacturer support.