STR10100SS_AY_00301 Equivalent & Substitute Parts

Part Overview

The STR10100SS_AY_00301 is a Schottky rectifier diode manufactured by Panjit International Inc., rated for 100V DC reverse voltage and 10A average rectified current in a DO-201AD axial through-hole package. This component is discontinued at DiGi Electronics, necessitating identification of equivalent alternatives for ongoing design support and procurement requirements. The part maintains ROHS3 compliance and REACH unaffected status, with unlimited moisture sensitivity level classification.

Substiute Parts

STR10100SS_AY_00301

Panjit International Inc.In Stock: 1533STR10100SS_AY_00301 Datasheet

Current PartRFQ

STR10100SS_AY_00301

Panjit International Inc.In Stock: 1533STR10100SS_AY_00301 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the STR10100SS_AY_00301 Schottky diode is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Voltage - DC Reverse (Vr) (Max): 100V minimum
• Current - Average Rectified (Io): 10A minimum
• Voltage - Forward (Vf) (Max) @ If: 770 mV @ 10A maximum
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
• Current - Reverse Leakage @ Vr: 50 µA @ 100V maximum
• Capacitance @ Vr, F: 490pF @ 4V, 1MHz maximum

Mechanical & Package Specifications:

• Package / Case: DO-201AD, Axial
• Mounting Type: Through Hole

Compliance & Environmental:

• Technology: Schottky
• RoHS Status: ROHS3 Compliant
• Operating Temperature - Junction: -55°C to 150°C minimum

Substitute parts must match all electrical parameters within specified tolerances, maintain identical package and mounting configuration, and satisfy all compliance requirements. No parameter relaxation or derating is permitted for substitution classification.

Parameter Comparison

Engineering Selection Recommendations

The STR10100SS_AY_00301 is classified as discontinued at DiGi Electronics. The identified substitute part STR10100SS_AY_00301 is parametrically identical across all electrical, mechanical, and compliance specifications. Both parts are manufactured by Panjit International Inc. and maintain ROHS3 compliance with REACH unaffected status.

Selection of the substitute part is appropriate for applications requiring:

• 100V DC reverse voltage rating
• 10A average rectified current capacity
• Fast recovery Schottky diode performance
• DO-201AD axial through-hole package configuration
• Operating temperature range of -55°C to 150°C
• ROHS3 and REACH compliance

The substitute part carries identical inventory status (1494 Pcs New Original In Stock) and maintains all environmental and regulatory certifications of the original component.

Frequently Asked Questions (FAQ)

Q: What makes STR10100SS_AY_00301 a valid substitute for the discontinued STR10100SS_AY_00301?

A: The substitute part is parametrically identical to the main part across all critical electrical specifications (100V reverse voltage, 10A current rating, 770 mV forward voltage), mechanical package (DO-201AD axial through-hole), and compliance certifications (ROHS3, REACH unaffected). No parameter derating or functional compromise occurs with this substitution.

Q: Are there any package compatibility considerations?

A: Both the main part and substitute utilize the DO-201AD axial through-hole package. PCB footprint, lead spacing, and mounting requirements are identical. No circuit board redesign is necessary.

Q: Does the substitute part maintain the same operating temperature range?

A: Yes. Both parts operate across the identical junction temperature range of -55°C to 150°C, ensuring thermal performance equivalence in all application environments.

Q: What is the moisture sensitivity classification for this substitute?

A: The substitute part carries MSL 1 (Unlimited) classification, identical to the original component. No special moisture control measures are required during storage or handling.

Q: Are regulatory and compliance certifications maintained?

A: The substitute part maintains ROHS3 compliance and REACH unaffected status, matching the original component exactly. No compliance risk is introduced through substitution.

Q: What are the key electrical parameters that define substitution eligibility?

A: Substitution is determined by matching: 100V DC reverse voltage rating, 10A average rectified current, 770 mV maximum forward voltage at 10A, fast recovery speed (≤ 500ns), 50 µA maximum reverse leakage current at 100V, and 490 pF capacitance at 4V, 1MHz. All parameters must match within specified tolerances.