STPS2L60AFN Equivalent & Substitute Parts Reference

Part Overview

STPS2L60AFN is a Schottky diode intended for surface-mount applications in the “Diodes, Rectifiers” category, with a maximum reverse voltage of 60 V and an average rectified current of 2A. The part features a fast recovery time and is supplied in a DO-221AC SMA Flat package. STPS2L60AFN is classified as obsolete; therefore, identifying suitable alternative models is required for new designs and replacement maintenance to ensure seamless supply chain continuity and functional compatibility.

Substiute Parts

STPS2L60AFN

STMicroelectronicsIn Stock: 9179STPS2L60AFN Datasheet

Current PartRFQ

STPS2L60A

STMicroelectronicsIn Stock: 40237STPS2L60A Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for STPS2L60AFN in the Diodes, Rectifiers category is strictly determined by matching the following electrical and mechanical parameters: maximum reverse voltage (60 V), average rectified current (2A), Schottky technology, forward voltage at rated current (600 mV @ 2A), fast recovery speed, reverse leakage current, surface mount package style, and comparator compliance markings. Product status and regulatory certifications must also be considered. Only parts matching these explicit characteristics are acceptable substitutes.

Parameter Comparison

Engineering Selection Recommendations

Substitution of STPS2L60AFN with STPS2L60A is supported by parameter parity, ROHS3 compliance and corresponding REACH status. Both parts meet identical electrical, environmental, and regulatory requirements within the Diodes, Rectifiers category. STPS2L60A is active, whereas STPS2L60AFN is obsolete, ensuring supply continuity for designs requiring this performance set.

Frequently Asked Questions (FAQ)

Q1: Which electrical parameters determine substitute compatibility between STPS2L60AFN and STPS2L60A?
A1: Compatibility is strictly determined by maximum reverse voltage (60 V), average rectified current (2A), forward voltage at rated current (600 mV @ 2A), recovery speed, and reverse leakage current.

Q2: How does the package differ between STPS2L60AFN and STPS2L60A?
A2: STPS2L60AFN uses the DO-221AC SMA Flat package with notch; STPS2L60A uses the DO-214AC SMA package. Dimension and footprint verification is required based on mechanical compatibility for the application.

Q3: Are both parts compliant with RoHS3 and REACH requirements?
A3: Both STPS2L60AFN and STPS2L60A are ROHS3 compliant and REACH unaffected.

Q4: What is the product status difference, and how does it impact selection?
A4: STPS2L60AFN is obsolete, while STPS2L60A is active. For designs demanding continued support, active parts are required.

Q5: Can STPS2L60A be used in place of STPS2L60AFN in all cases?
A5: Substitute selection is determined by identical listed electrical and compliance parameters; mechanical package differences must be considered for footprint compatibility.