STPS10M60SF Equivalent & Substitute Parts

Part Overview

The STPS10M60SF is a Schottky rectifier diode manufactured by STMicroelectronics, rated for 60 V DC reverse voltage and 10 A average rectified current in a surface mount TO-277A (SMPC) package. This component is classified as Active product status and is ROHS3 compliant with ECOPACK®2 series designation.

Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or application-specific performance parameters. The parts listed below maintain electrical and mechanical compatibility within defined operational boundaries.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	60	V
Current - Average Rectified (Io)	10	A
Voltage - Forward (Vf) (Max) @ If	650 mV @ 10 A	mV
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)	ns
Current - Reverse Leakage @ Vr	50	µA @ 60 V
Technology	Schottky	—
Mounting Type	Surface Mount	—
Package / Case	TO-277, 3-PowerDFN	—
Operating Temperature - Junction	-40°C ~ 175°C	°C
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the STPS10M60SF is determined by the following critical parameters:

Electrical Compatibility Criteria:

Voltage - DC Reverse (Vr) (Max): Must equal or exceed 60 V
Current - Average Rectified (Io): Must equal or exceed 10 A
Technology: Schottky diode type
Speed: Fast Recovery ≤ 500ns, > 200mA (Io)

Mechanical Compatibility Criteria:

Mounting Type: Surface Mount
Package / Case: TO-277, 3-PowerDFN compatible footprint
Supplier Device Package: TO-277A (SMPC) or equivalent TO-277 variant

Compliance Criteria:

RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts are grouped into two categories: Parametric Equivalent (identical electrical and mechanical specifications) and Similar (compatible electrical performance with allowable parameter variations within application tolerance).

Parameter Comparison

Parameter	STPS10M60SF	STPS10M60SFY	FSV2060L	PMEG060V050EPDZ
Manufacturer	STMicroelectronics	STMicroelectronics	onsemi	Nexperia USA Inc.
Voltage - DC Reverse (Vr) (Max)	60 V	60 V	60 V	60 V
Current - Average Rectified (Io)	10 A	10 A	20 A	5 A
Voltage - Forward (Vf) (Max) @ If	650 mV @ 10 A	650 mV @ 10 A	600 mV @ 20 A	560 mV @ 5 A
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)	Fast Recovery ≤ 500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr	50 µA @ 60 V	50 µA @ 60 V	320 µA @ 60 V	400 µA @ 60 V
Technology	Schottky	Schottky	Schottky	Schottky
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	TO-277, 3-PowerDFN	TO-277, 3-PowerDFN	TO-277, 3-PowerDFN	TO-277, 3-PowerDFN
Operating Temperature - Junction	-40°C ~ 175°C	-40°C ~ 175°C	-55°C ~ 150°C	Max 175°C
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Not For New Designs	Not For New Designs

Engineering Selection Recommendations

STPS10M60SFY (STMicroelectronics)

The STPS10M60SFY is a parametric equivalent to the STPS10M60SF with identical electrical specifications and mechanical compatibility. Both parts are Active product status and ROHS3 compliant. The STPS10M60SFY carries AEC-Q101 automotive qualification, making it suitable for applications requiring automotive-grade reliability. This part is the primary equivalent for direct substitution in new designs and production environments.

FSV2060L (onsemi)

The FSV2060L is a similar Schottky diode with 60 V reverse voltage rating and 20 A average rectified current capacity. This part exceeds the 10 A requirement of the STPS10M60SF and is compatible with the TO-277 package family. However, FSV2060L carries "Not For New Designs" product status, indicating it is in end-of-life phase. This part is suitable only for legacy system maintenance or replacement applications where design continuity is required. The operating temperature range is -55°C to 150°C, which is narrower than the STPS10M60SF at the upper limit.

PMEG060V050EPDZ (Nexperia USA Inc.)

The PMEG060V050EPDZ is a similar Schottky diode with 60 V reverse voltage rating and 5 A average rectified current capacity. This part does not meet the 10 A current requirement and is therefore suitable only for applications with reduced current demands. PMEG060V050EPDZ carries AEC-Q101 automotive qualification and "Not For New Designs" product status. This part is not recommended as a direct substitute for the STPS10M60SF in applications requiring 10 A operation.

Frequently Asked Questions (FAQ)

Q: Can STPS10M60SFY be used as a direct replacement for STPS10M60SF?

A: Yes. The STPS10M60SFY is a parametric equivalent with identical voltage, current, and thermal specifications. Both parts use the same TO-277A (SMPC) package and are ROHS3 compliant. The primary difference is that STPS10M60SFY includes AEC-Q101 automotive qualification. Direct substitution is valid for all applications where the STPS10M60SF is specified.

Q: Is FSV2060L suitable as a substitute for STPS10M60SF?

A: FSV2060L is mechanically compatible and electrically compatible at the voltage level (60 V). However, FSV2060L is rated for 20 A, which exceeds the 10 A requirement. FSV2060L carries "Not For New Designs" status and should be used only for legacy system maintenance. The operating temperature maximum is 150°C compared to 175°C for STPS10M60SF.

Q: Why is PMEG060V050EPDZ listed as a substitute if it is only rated for 5 A?

A: PMEG060V050EPDZ is listed as a similar part due to voltage compatibility (60 V) and package compatibility (TO-277, 3-PowerDFN). However, the 5 A current rating does not meet the 10 A requirement of the STPS10M60SF. This part is not suitable for direct substitution in applications requiring 10 A operation and is included for reference only in applications with reduced current demands.

Q: What is the significance of "Not For New Designs" status?

A: "Not For New Designs" indicates that the manufacturer has discontinued active development and is in end-of-life phase. These parts are available for existing inventory but are not recommended for new product designs. FSV2060L and PMEG060V050EPDZ carry this status and should be used only for maintenance, repair, or legacy system support.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All parts listed—STPS10M60SF, STPS10M60SFY, FSV2060L, and PMEG060V050EPDZ—are ROHS3 compliant and have Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling.

Q: What is the package compatibility between these parts?

A: All parts use the TO-277, 3-PowerDFN package family. STPS10M60SF and STPS10M60SFY use TO-277A (SMPC) supplier device package, while FSV2060L uses TO-277-3 and PMEG060V050EPDZ uses CFP15 supplier device package. All are mechanically compatible with TO-277 footprints on printed circuit boards.

Q: Which substitute part is recommended for new designs?

A: STPS10M60SFY is the recommended substitute for new designs. It is a parametric equivalent with Active product status, ROHS3 compliance, and AEC-Q101 automotive qualification. FSV2060L and PMEG060V050EPDZ are not recommended for new designs due to "Not For New Designs" status.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message