STP13NK60ZFP N-Channel 600V 13A MOSFET Equivalent & Substitute Parts

Part Overview

The STP13NK60ZFP is an N-Channel 600V 13A MOSFET manufactured by STMicroelectronics in the SuperMESH™ series. This device is rated for continuous drain current of 13A at 25°C with a maximum power dissipation of 35W and operates across a temperature range of -55°C to 150°C. The part is mounted in a TO-220FP through-hole package and maintains Active product status with full RoHS3 compliance.

Equivalent and substitute parts are identified based on matching or closely aligned electrical and mechanical parameters within the N-Channel MOSFET category. Substitutes are necessary when the primary part is unavailable, when alternative packaging or thermal characteristics better suit application requirements, or when design flexibility permits operation within the specified parameter ranges of alternative devices.

Key Parameters

Parameter	Value	Unit
FET Type	N-Channel	—
Drain to Source Voltage (Vdss)	600	V
Continuous Drain Current (Id) @ 25°C	13	A
Drive Voltage (Max Rds On)	10	V
Rds On (Max) @ Id, Vgs	550 mOhm @ 4.5A, 10V	—
Power Dissipation (Max)	35	W
Operating Temperature Range	-55 to 150	°C
Mounting Type	Through Hole	—
Package / Case	TO-220-3 Full Pack	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution logic for the STP13NK60ZFP is based on the following critical parameters:

Voltage Rating Compatibility: All substitute parts maintain a Drain to Source Voltage (Vdss) of 600V or higher, ensuring safe operation in circuits designed for the primary part.

Current Handling: Substitute parts are grouped by continuous drain current (Id) capability. The primary part operates at 13A; substitutes range from 7A to 12A. Parts with lower current ratings (7A to 9A) are suitable for applications with reduced current demands or where thermal management is enhanced. The 12A substitute (AOTF12N60L) provides near-equivalent current handling.

On-Resistance (Rds On): All substitutes operate at 10V drive voltage with Rds On values between 380 mOhm and 620 mOhm, maintaining comparable conduction losses within acceptable design margins.

Power Dissipation: Substitute parts range from 31W to 89W maximum power dissipation. Lower-rated devices (31W to 50W) are suitable for applications with reduced thermal loads, while higher-rated devices (89W) provide enhanced thermal headroom.

Package Compatibility: All substitutes are through-hole mounted in TO-220 variants (TO-220F, TO-220FM, TO-220FP, TO-220F-3). These packages are mechanically and electrically interchangeable on standard PCB layouts.

Compliance & Status: All substitutes maintain RoHS3 compliance and REACH Unaffected status. Product status varies; Active-status parts are preferred for new designs, while Not For New Designs parts are suitable for legacy system support or replacement scenarios.

Parameter Comparison

Part Number	Manufacturer	Vdss (V)	Id @ 25°C (A)	Rds On (mOhm)	Power Dissipation (W)	Package	Product Status
STP13NK60ZFP	STMicroelectronics	600	13	550 @ 4.5A, 10V	35	TO-220FP	Active
AOTF12N60L	Alpha & Omega Semiconductor Inc.	600	12	550 @ 6A, 10V	50	TO-220F	Active
FCPF11N60F	onsemi	600	11	380 @ 5.5A, 10V	36	TO-220F-3	Not For New Designs
FCPF600N60Z	Fairchild Semiconductor	600	7.4	600 @ 3.7A, 10V	89	TO-220F-3	Active
FCPF7N60	onsemi	600	7	600 @ 3.5A, 10V	31	TO-220F-3	Not For New Designs
FCPF7N60YDTU	Fairchild Semiconductor	600	7	600 @ 3.5A, 10V	31	TO-220F-3 (Y-Forming)	Active
R6007KNX	Rohm Semiconductor	600	7	620 @ 2.4A, 10V	46	TO-220FM	Active
R6009ENX	Rohm Semiconductor	600	9	535 @ 2.8A, 10V	40	TO-220FM	Active
SPA07N60C3XKSA1	Infineon Technologies	650	7.3	600 @ 4.6A, 10V	32	PG-TO220-3-31	Active

Engineering Selection Recommendations

For Direct Replacement (Highest Compatibility): AOTF12N60L is the primary substitute candidate. It maintains 600V Vdss rating, delivers 12A continuous drain current (92% of primary part capability), and operates at identical 10V drive voltage with matching 550 mOhm Rds On specification. Both devices are Active status with RoHS3 compliance. The 50W power dissipation rating exceeds the primary part, providing thermal margin. TO-220F packaging is mechanically compatible with standard through-hole layouts.

For Applications with Reduced Current Requirements: FCPF7N60YDTU (Fairchild Semiconductor) and R6009ENX (Rohm Semiconductor) are suitable for designs operating below 9A continuous drain current. FCPF7N60YDTU maintains Active product status and is specified with Y-forming leads for automated assembly. R6009ENX provides 9A capability with 535 mOhm Rds On and Active status. Both maintain 600V Vdss and full temperature range operation.

For Enhanced Thermal Performance: FCPF600N60Z (Fairchild Semiconductor) offers 89W maximum power dissipation, the highest among substitutes, suitable for applications requiring significant thermal headroom. This device is Active status with 600V Vdss but operates at 7.4A continuous drain current. Selection is appropriate only when current requirements do not exceed 7.4A.

For Legacy System Support: FCPF11N60F (onsemi) is marked Not For New Designs but remains available with 11A continuous drain current and superior 380 mOhm Rds On specification. This part is suitable for replacement scenarios in existing systems where design changes are not permitted.

Voltage Rating Consideration: SPA07N60C3XKSA1 (Infineon Technologies) operates at 650V Vdss, providing 50V additional voltage margin. This part is suitable for applications where higher voltage transient immunity is required. The 7.3A current rating and 32W power dissipation are appropriate for reduced-current designs.

Frequently Asked Questions (FAQ)

Q: Can AOTF12N60L directly replace STP13NK60ZFP in all applications?

A: AOTF12N60L is suitable for applications where continuous drain current does not exceed 12A. The 600V Vdss rating, 10V drive voltage, and 550 mOhm Rds On match the primary part specifications. Verify that circuit design does not require the full 13A capability of the original part. Both devices maintain identical operating temperature range (-55°C to 150°C) and RoHS3 compliance.

Q: What is the difference between TO-220F, TO-220FM, and TO-220FP packages?

A: All three are through-hole TO-220 variants with identical pin pitch and mounting footprint compatibility. TO-220FP (Full Pack) and TO-220F are standard configurations. TO-220FM (Full Pack Molded) features a molded plastic body. TO-220F-3 denotes a three-pin variant. These packages are mechanically interchangeable on standard PCB layouts. Verify lead forming specifications (standard vs. Y-forming) for automated assembly compatibility.

Q: Can I use a 7A substitute part in a circuit designed for 13A operation?

A: No. Substitutes with lower current ratings (7A to 9A) are suitable only for applications where the actual continuous drain current requirement does not exceed the substitute part's rating. Using an undersized device in a 13A circuit will result in excessive junction temperature, reduced device lifetime, and potential thermal runaway. Verify actual circuit current requirements before selecting a lower-rated substitute.

Q: Why do some substitutes have higher power dissipation ratings than the primary part?

A: Power dissipation rating reflects the device's thermal capability under specified conditions (typically 25°C case temperature). Higher ratings indicate enhanced thermal performance or larger die area. A substitute with higher power dissipation (e.g., 50W vs. 35W) provides thermal margin and may operate at lower junction temperature under identical current conditions, improving reliability and lifetime.

Q: Are Not For New Designs parts acceptable for new circuit development?

A: Not For New Designs parts are suitable for replacement in existing systems or legacy applications where design changes are not permitted. For new circuit development, select Active-status parts to ensure long-term availability, continued manufacturer support, and access to latest process improvements. FCPF11N60F is marked Not For New Designs; use AOTF12N60L or R6009ENX for new designs requiring 11A to 12A capability.

Q: What is the significance of Rds On variation among substitutes?

A: On-resistance (Rds On) directly affects conduction losses and junction temperature. Lower Rds On values (e.g., 380 mOhm for FCPF11N60F) reduce power dissipation and heat generation. Higher values (e.g., 620 mOhm for R6007KNX) increase conduction losses. All substitutes operate at 10V drive voltage. Verify that circuit thermal design accommodates the Rds On specification of the selected substitute, particularly in high-frequency switching applications.

Q: Can SPA07N60C3XKSA1 (650V) be used in a 600V circuit?

A: Yes. SPA07N60C3XKSA1 with 650V Vdss rating is suitable for 600V circuits. The higher voltage rating provides additional margin for transient overvoltage conditions. However, verify that the 7.3A continuous drain current and 32W power dissipation meet circuit requirements. The CoolMOS™ series technology may offer improved efficiency characteristics compared to the primary part.

Q: What compliance certifications are common to all substitutes?

A: All listed substitutes maintain RoHS3 compliance and REACH Unaffected status, matching the primary part. These certifications ensure compliance with environmental and hazardous substance regulations. Moisture Sensitivity Level (MSL) is 1 (Unlimited) for most parts, indicating standard handling requirements. Verify specific certifications for your application's regulatory requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message