STGP10NC60K IGBT Equivalent & Substitute Parts

Part Overview

The STGP10NC60K is a 600V, 20A IGBT manufactured by STMicroelectronics in the PowerMESH™ series, housed in a TO-220-3 through-hole package. This device is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and production continuity. The STGP10NC60K serves applications requiring medium-voltage switching at moderate current levels with a maximum power dissipation of 60W.

Substiute Parts

STGP10NC60K

STMicroelectronicsIn Stock: 683STGP10NC60K Datasheet

Current PartRFQ

IGP10N60TXKSA1

Infineon TechnologiesIn Stock: 1479IGP10N60TXKSA1 Datasheet

SimilarRFQ

IKP10N60TXKSA1

Infineon TechnologiesIn Stock: 2455IKP10N60TXKSA1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the STGP10NC60K is determined by matching the following critical electrical and mechanical parameters:

Electrical Matching Criteria:

• Voltage - Collector Emitter Breakdown (Max): 600V
• Current - Collector (Ic) (Max): 20A
• Current - Collector Pulsed (Icm): 30A
• Package / Case: TO-220-3
• Mounting Type: Through Hole
• Input Type: Standard

The substitute parts IGP10N60TXKSA1 and IKP10N60TXKSA1, both manufactured by Infineon Technologies, satisfy these core electrical and mechanical requirements. Both devices are rated for 600V breakdown voltage, 20A continuous collector current, and 30A pulsed current. Both are housed in TO-220-3 through-hole packages with standard input configuration, enabling direct functional replacement in circuit designs originally specified for the STGP10NC60K.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The STGP10NC60K is classified as obsolete. The substitute parts IGP10N60TXKSA1 and IKP10N60TXKSA1 are both active products from Infineon Technologies, ensuring long-term availability and continued manufacturing support.

Compliance and Certification: All three devices maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for electronic component procurement. Both substitute parts carry the same ECCN (EAR99) and HTSUS (8541.29.0095) classifications as the original part.

Electrical Compatibility: The substitute parts meet or exceed the core electrical specifications of the STGP10NC60K. Both devices support the same 600V breakdown voltage, 20A continuous current, and 30A pulsed current ratings. The TO-220-3 package and through-hole mounting configuration provide mechanical compatibility without requiring PCB redesign.

Performance Differences: The Infineon substitutes exhibit lower on-state voltage (2.05V versus 2.5V at comparable test conditions), resulting in reduced conduction losses. However, gate charge is higher (62nC versus 19nC), and turn-off delay is extended (215ns versus 72ns). These differences require evaluation against specific application switching frequency and thermal management requirements.

Frequently Asked Questions (FAQ)

Q: Can IGP10N60TXKSA1 and IKP10N60TXKSA1 be used interchangeably with STGP10NC60K?

A: Both Infineon devices satisfy the core electrical and mechanical substitution criteria: 600V breakdown voltage, 20A continuous current, 30A pulsed current, and TO-220-3 through-hole packaging. Direct pin-compatible replacement is possible without PCB modification. However, differences in switching characteristics (gate charge, turn-on/turn-off delays) and on-state voltage require circuit-level evaluation to confirm suitability for the specific application.

Q: What are the key differences between IGP10N60TXKSA1 and IKP10N60TXKSA1?

A: Both devices share identical electrical ratings and switching characteristics. The primary distinction is the reverse recovery time specification: IKP10N60TXKSA1 includes a reverse recovery time (trr) specification of 115ns, while IGP10N60TXKSA1 does not provide this parameter in the available data. Selection between these two should be based on application requirements for reverse recovery behavior.

Q: Are there temperature range limitations when substituting the STGP10NC60K?

A: The STGP10NC60K operates from -55°C to 150°C (TJ), while both Infineon substitutes operate from -40°C to 175°C (TJ). Applications requiring operation below -40°C cannot use the substitute parts. Applications within the -40°C to 150°C range are fully compatible with both substitutes.

Q: How do switching losses compare between the original and substitute parts?

A: The STGP10NC60K specifies switching energy of 55µJ (on) and 85µJ (off) at 390V, 5A, 10Ohm, 15V. The Infineon substitutes specify 430µJ total switching energy at 400V, 10A, 23Ohm, 15V. Direct comparison is not possible due to different test conditions. Application-specific thermal and EMI analysis is required to assess switching loss impact.

Q: Is PCB layout modification required when substituting these parts?

A: No PCB layout modification is required. All three devices use the TO-220-3 through-hole package with identical pin configuration and mounting footprint. Existing PCB designs require no physical changes for mechanical compatibility.

Q: What is the inventory status of substitute parts?

A: IGP10N60TXKSA1 has 1,386 pieces in stock, and IKP10N60TXKSA1 has 2,393 pieces in stock. Both are classified as active products with ongoing manufacturing support, providing superior long-term availability compared to the obsolete STGP10NC60K.