STD30NF06L Equivalent & Substitute Parts

Part Overview

The STD30NF06L is an N-Channel MOSFET manufactured by UMW, designed for surface mount applications in the TO-252 (DPAK) package. This device operates at 60 V drain-to-source voltage with a continuous drain current rating of 30 A at 25°C and maximum power dissipation of 55 W. The part is currently in active production status with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). Substitute parts are identified based on matching electrical characteristics, package specifications, and operational parameters to ensure functional equivalence in circuit applications.

Substiute Parts

STD30NF06L

UMWIn Stock: 15441STD30NF06L Datasheet

Current PartRFQ

30N06

UMWIn Stock: 1027130N06 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the STD30NF06L are identified through direct parametric equivalence. The substitution logic is based on the following critical parameters that must match or exceed the main part specifications:

Electrical Equivalence Criteria:

• Drain-to-Source Voltage (Vdss): 60 V minimum
• Continuous Drain Current (Id): 30 A at 25°C
• On-State Resistance (Rds On): 29 mOhm maximum at specified conditions
• Gate Threshold Voltage (Vgs(th)): 2.5 V maximum
• Gate Charge (Qg): 25 nC maximum at 10 V
• Input Capacitance (Ciss): 1562 pF maximum at 25 V
• Power Dissipation: 55 W maximum

Mechanical and Package Equivalence Criteria:

• Mounting Type: Surface Mount
• Package: TO-252 (DPAK) with 2 Leads + Tab configuration
• Operating Temperature Range: -55°C to 150°C

Compliance Criteria:

• RoHS3 Compliance required
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parts meeting all these criteria are classified as direct parametric equivalents and may be substituted without circuit redesign.

Parameter Comparison

Engineering Selection Recommendations

The 30N06 is a direct parametric equivalent to the STD30NF06L. Both devices are manufactured by UMW and share identical electrical specifications across all critical parameters including voltage rating, current capacity, on-state resistance, gate characteristics, and power dissipation limits. Both parts are in active production status with full RoHS3 compliance and MSL 1 rating.

The primary distinction between these parts is packaging format: the STD30NF06L is supplied in Cut Tape (CT) and Digi-Reel® packaging, while the 30N06 is supplied in Tape & Reel (TR) format. This difference affects procurement and assembly processes but does not impact electrical or mechanical compatibility.

Selection between these equivalent parts should be based on packaging requirements and supply chain availability. Both parts are suitable for direct substitution in applications requiring N-Channel MOSFETs with 60 V rating, 30 A continuous drain current, and TO-252 (DPAK) surface mount package configuration.

Frequently Asked Questions (FAQ)

Q: Can the 30N06 be used as a direct replacement for the STD30NF06L?

A: Yes. The 30N06 meets all electrical and mechanical specifications of the STD30NF06L. Both devices have identical Vdss, Id, Rds On, Vgs(th), gate charge, input capacitance, and power dissipation ratings. Both use the same TO-252 (DPAK) package and operate across the same temperature range. The parts are functionally interchangeable.

Q: What is the difference between Cut Tape (CT) and Tape & Reel (TR) packaging?

A: Cut Tape packaging supplies components in individual strips cut to specified lengths, suitable for manual assembly or small-volume production. Tape & Reel packaging supplies components on continuous reels, optimized for automated pick-and-place assembly in high-volume manufacturing. Both formats contain identical components; the difference is in delivery and handling format.

Q: Are both parts RoHS compliant?

A: Yes. Both the STD30NF06L and 30N06 are RoHS3 compliant and carry MSL 1 (unlimited) moisture sensitivity rating, indicating they meet environmental and reliability standards for industrial and commercial applications.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by matching Drain-to-Source Voltage (60 V), Continuous Drain Current (30 A), On-State Resistance (29 mOhm at 15A, 10V), Gate Threshold Voltage (2.5 V), Gate Charge (25 nC), Input Capacitance (1562 pF), Power Dissipation (55 W), Operating Temperature Range (-55°C to 150°C), and Package Type (TO-252 DPAK). All these parameters must match or exceed the original specification.

Q: Can these parts be used in applications requiring different voltage or current ratings?

A: No. These parts are rated specifically for 60 V maximum drain-to-source voltage and 30 A continuous drain current. Applications requiring different voltage or current specifications require parts with different electrical ratings.

Q: What is the operating temperature range for these devices?

A: Both devices operate across a junction temperature range of -55°C to 150°C (TJ), suitable for industrial and automotive applications requiring extended temperature performance.