STD11N60DM2 Equivalent & Substitute Parts

Part Overview

The STD11N60DM2 is an N-Channel 650V 10A MOSFET manufactured by STMicroelectronics in the MDmesh™ DM2 series. This device is packaged in DPAK (TO-252-3) surface mount configuration and is rated for 110W power dissipation at case temperature. The part is currently in Active product status with 4868 units in stock.

Substitute parts are identified when equivalent electrical performance can be achieved within the allowed parameter ranges for N-Channel MOSFETs in surface mount DPAK packaging. Alternatives may be required due to component availability, supply chain considerations, or design flexibility within specified electrical constraints.

Substiute Parts

STD11N60DM2

STMicroelectronicsIn Stock: 4913STD11N60DM2 Datasheet

Current PartRFQ

AOD7S60

Alpha & Omega Semiconductor Inc.In Stock: 6117AOD7S60 Datasheet

SimilarRFQ

TK560P60Y,RQ

Toshiba Semiconductor and StorageIn Stock: 2379TK560P60Y,RQ Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the STD11N60DM2 is determined by the following criteria:

Primary Substitution Parameters:

• FET Type: N-Channel topology required
• Package / Case: TO-252-3 DPAK surface mount configuration required
• Drain to Source Voltage (Vdss): Minimum 600V (STD11N60DM2 rated at 650V)
• Current - Continuous Drain (Id): Minimum 7A (STD11N60DM2 rated at 10A)
• Mounting Type: Surface Mount required

Secondary Compatibility Parameters:

• Operating Temperature Range: -55°C to 150°C (TJ) minimum
• RoHS Compliance: ROHS3 Compliant required
• Rds On characteristics: Lower on-resistance values indicate superior performance

The identified substitute parts AOD7S60 and TK560P60Y,RQ meet the primary substitution criteria. Both are N-Channel MOSFETs in DPAK surface mount packaging with voltage ratings of 600V and continuous drain current ratings of 7A. Both maintain full RoHS3 compliance and operate within the required temperature range.

Parameter Comparison

Engineering Selection Recommendations

STD11N60DM2 (Primary Part)

The STD11N60DM2 is the recommended selection for new designs. This part maintains Active product status, ensuring long-term availability and supply chain stability. It provides the highest continuous drain current rating (10A) and power dissipation capability (110W) among the three options, offering the greatest design margin for applications requiring sustained current delivery.

AOD7S60 (Limited Substitution)

The AOD7S60 is classified as Not For New Designs by the manufacturer. While this part meets the minimum substitution criteria with 600V Vdss and 7A continuous drain current, its discontinued design status restricts its use to legacy system support or temporary supply solutions only. The higher on-resistance (600mOhm) and lower power dissipation rating (83W) represent reduced performance compared to the primary part.

TK560P60Y,RQ (Active Substitution)

The TK560P60Y,RQ maintains Active product status and is suitable for applications where the 7A continuous drain current and 60W power dissipation rating are sufficient. This Toshiba part offers the lowest on-resistance among the substitutes (560mOhm) and is compatible with the same DPAK surface mount package. This option is appropriate for designs with lower current requirements or where thermal management is less critical.

Frequently Asked Questions (FAQ)

Q: Can AOD7S60 be used as a direct replacement for STD11N60DM2?

A: AOD7S60 meets the minimum electrical and package requirements for substitution. However, the part is classified as Not For New Designs. The reduced continuous drain current (7A vs. 10A) and power dissipation (83W vs. 110W) require verification that application requirements do not exceed these limits.

Q: What is the primary difference between STD11N60DM2 and TK560P60Y,RQ?

A: Both parts are N-Channel MOSFETs in DPAK packaging with 600V minimum voltage rating. The STD11N60DM2 provides higher continuous drain current (10A vs. 7A) and power dissipation (110W vs. 60W). The TK560P60Y,RQ offers lower on-resistance (560mOhm vs. 420mOhm at different measurement points) and maintains Active product status.

Q: Are all three parts RoHS3 compliant?

A: Yes. STD11N60DM2, AOD7S60, and TK560P60Y,RQ are all ROHS3 Compliant with Moisture Sensitivity Level 1 (Unlimited).

Q: What is the voltage rating difference between the main part and substitutes?

A: STD11N60DM2 is rated at 650V Vdss, while both AOD7S60 and TK560P60Y,RQ are rated at 600V Vdss. Applications operating near the upper voltage limit require confirmation that 600V rating is acceptable.

Q: Can these parts be used interchangeably in existing designs?

A: Physical package compatibility (all use TO-252-3 DPAK) allows pin-for-pin substitution. However, electrical parameter differences—particularly continuous drain current and power dissipation ratings—require circuit analysis to confirm the substitute part meets application requirements.

Q: Which substitute part is recommended for new designs?

A: TK560P60Y,RQ is the recommended substitute for new designs, as it maintains Active product status. AOD7S60 should not be used in new designs due to its Not For New Designs classification.