ST60X-36S Equivalent & Substitute Parts

Part Overview

The ST60X-36S is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for surface mount, right-angle applications with 36 positions at 0.020" (0.50mm) pitch. This connector is classified as obsolete, which necessitates identification of active equivalent parts to ensure design continuity and procurement availability. The part functions as a board-to-cable/wire interface with solder termination and latch holder fastening, suitable for applications requiring compact, high-density interconnection.

Substiute Parts

ST60X-36S

Hirose Electric Co LtdIn Stock: 19803ST60X-36S Datasheet

Current PartRFQ

ST60X-36S(30)

Hirose Electric Co LtdIn Stock: 869ST60X-36S(30) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The ST60X-36S(30) is identified as the manufacturer-recommended substitute for the obsolete ST60X-36S. Substitution eligibility is determined by strict equivalence across the following critical parameters:

• Connector type and contact configuration (Plug, Cradle; Non-Gendered)
• Position count and pitch specification (36 positions at 0.020" / 0.50mm)
• Mounting method and orientation (Surface Mount, Right Angle)
• Electrical ratings (0.5A current, 100V voltage)
• Operating temperature range (-30°C ~ 80°C)
• Insulation material and flammability compliance (Polyamide PA9T, UL94 V-0)
• Termination method (Solder with Latch Holder fastening)

The ST60X-36S(30) maintains identical electrical and mechanical specifications while differing only in product status (Active vs. Obsolete) and packaging format (Tape & Reel vs. standard packaging).

Parameter Comparison

Engineering Selection Recommendations

The ST60X-36S(30) is the direct equivalent for the obsolete ST60X-36S. Selection of the substitute part is based on:

• Identical electrical and mechanical specifications across all critical parameters
• Active product status ensuring ongoing availability and supply chain continuity
• RoHS compliance certification of the substitute part, providing regulatory advantage for new designs
• Tape & Reel packaging format suitable for automated assembly processes
• Maintained compliance with UL94 V-0 flammability requirements

For applications currently using the ST60X-36S, direct substitution with ST60X-36S(30) is electrically and mechanically compatible without design modification.

Frequently Asked Questions (FAQ)

Q: Can ST60X-36S(30) be used as a direct replacement for ST60X-36S?

A: Yes. The ST60X-36S(30) maintains identical electrical ratings (0.5A, 100V), mechanical dimensions, pitch (0.020" / 0.50mm), mounting configuration (Surface Mount, Right Angle), and contact specifications. The parts are functionally interchangeable.

Q: What is the difference between ST60X-36S and ST60X-36S(30)?

A: The primary differences are product status (Obsolete vs. Active), packaging format (Standard vs. Tape & Reel), and RoHS compliance certification. All electrical and mechanical parameters are identical.

Q: Is the Tape & Reel packaging of ST60X-36S(30) compatible with existing assembly equipment?

A: Tape & Reel packaging is standard for automated surface mount assembly. Compatibility depends on your specific assembly equipment specifications. Verify your equipment supports 0.50mm pitch connector reels.

Q: Does ST60X-36S(30) require any PCB layout modifications?

A: No. The footprint, pitch, mounting orientation, and solder termination are identical to the original ST60X-36S. Existing PCB designs require no modification.

Q: What is the significance of RoHS compliance on ST60X-36S(30)?

A: RoHS compliance indicates the substitute part meets Restriction of Hazardous Substances regulations, providing regulatory advantage for designs targeting markets with RoHS requirements.