SSW-150-22-G-D-RA Equivalent & Substitute Parts

Part Overview

The SSW-150-22-G-D-RA is a 100 Position Receptacle Connector manufactured by Samtec Inc., designed for Through Hole, Right Angle mounting with 0.100" (2.54mm) pitch. This connector features gold-plated forked contacts, solder termination, and push-pull fastening, suitable for board-to-board or cable applications. The part maintains Active product status with 1093 units in current inventory. Substitute parts may be required due to inventory constraints, lead time considerations, or design flexibility within equivalent electrical and mechanical specifications.

Substiute Parts

SSW-150-22-G-D-RA

Samtec Inc.In Stock: 1120SSW-150-22-G-D-RA Datasheet

Current PartRFQ

SSW-150-02-G-D-RA

Samtec Inc.In Stock: 3866SSW-150-02-G-D-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-150-22-G-D-RA is determined by strict equivalence across the following critical parameters:

• Connector Type & Configuration: Receptacle, 100 positions, 2 rows
• Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
• Mounting & Termination: Through Hole, Right Angle orientation with solder termination
• Contact Properties: Forked contact type, gold plating on mating surface, phosphor bronze material
• Electrical Performance: 4.7A per contact current rating
• Environmental Compliance: UL94 V-0 flammability rating, ROHS3 compliance, -55°C ~ 125°C operating range
• Fastening: Push-Pull mechanism

The substitute part SSW-150-02-G-D-RA meets all these criteria, maintaining identical electrical and mechanical specifications while differing only in internal design designation (22 vs. 02 suffix).

Parameter Comparison

Engineering Selection Recommendations

Both SSW-150-22-G-D-RA and SSW-150-02-G-D-RA are Active status products from Samtec Inc. with full ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts should be based on availability and lead time requirements. The SSW-150-02-G-D-RA currently maintains higher inventory (3771 units) compared to SSW-150-22-G-D-RA (1093 units), making it suitable for applications where supply chain flexibility is a consideration. Both parts satisfy identical electrical, mechanical, and environmental specifications and are interchangeable within the SSW-150 series framework.

Frequently Asked Questions (FAQ)

Q: Are SSW-150-22-G-D-RA and SSW-150-02-G-D-RA electrically interchangeable?

A: Yes. Both parts maintain identical current ratings (4.7A per contact), operating temperature range (-55°C ~ 125°C), and contact finish specifications. They are electrically equivalent.

Q: What is the difference between the 22 and 02 designations in the part numbers?

A: The 22 and 02 suffixes represent internal design variants within the SSW-150 series. All other specifications remain identical, and the parts are mechanically and electrically interchangeable.

Q: Can these connectors be used interchangeably in PCB designs?

A: Yes. Both parts feature identical Through Hole, Right Angle mounting configurations, 0.100" (2.54mm) pitch, and 100-position, 2-row layouts. PCB footprints and mounting requirements are identical.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-150-22-G-D-RA and SSW-150-02-G-D-RA are ROHS3 compliant and carry UL94 V-0 flammability ratings.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection may be based on current inventory availability, lead times, or supply chain preferences. Both maintain Active product status with equivalent specifications.