SSW-150-22-F-D-RA Equivalent & Substitute Parts

Part Overview

The SSW-150-22-F-D-RA is a 100 position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications. This connector features 0.100" (2.54mm) pitch through-hole mounting with right-angle orientation and gold-plated mating contacts. The product maintains active status with 878 units in current inventory. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory requirements necessitate alternative stock sources.

Substiute Parts

SSW-150-22-F-D-RA

Samtec Inc.In Stock: 957SSW-150-22-F-D-RA Datasheet

Current PartRFQ

SSW-150-02-F-D-RA

Samtec Inc.In Stock: 1142SSW-150-02-F-D-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-150-22-F-D-RA is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (100)
• Pitch specification (0.100" / 2.54mm)
• Number of rows (2)
• Mounting configuration (Through Hole, Right Angle)
• Contact finish at mating interface (Gold)
• Current rating per contact (4.7A)
• Operating temperature range (-55°C ~ 125°C)
• Insulation material (Liquid Crystal Polymer)
• Compliance certifications (UL94 V-0, ROHS3)

The identified substitute part SSW-150-02-F-D-RA meets all specified electrical and mechanical parameters, confirming direct substitutability within the SSW series.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-150-22-F-D-RA and SSW-150-02-F-D-RA maintain active product status with full ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts is based on inventory availability and supply chain requirements rather than electrical or mechanical performance differences. The SSW-150-02-F-D-RA currently maintains higher inventory levels at 1069 units compared to 878 units for the primary part number, making it suitable for high-volume procurement scenarios. Both connectors are certified for identical operating conditions and applications within the specified temperature range of -55°C to 125°C.

Frequently Asked Questions (FAQ)

Q: Are SSW-150-22-F-D-RA and SSW-150-02-F-D-RA electrically interchangeable?

A: Yes. Both parts share identical electrical specifications including 4.7A per contact current rating, gold mating contact finish, and phosphor bronze contact material. They are direct electrical equivalents.

Q: Can these connectors be used interchangeably in PCB designs?

A: Yes. Both connectors feature identical mechanical dimensions, pitch specifications (0.100"), mounting configuration (through-hole right-angle), and insulation height (0.195"). PCB footprints are identical.

Q: What is the difference between these two part numbers?

A: The part numbers differ only in their internal designation codes (22 versus 02). All functional, electrical, and mechanical parameters are equivalent. The difference reflects Samtec's internal product numbering system.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-150-22-F-D-RA and SSW-150-02-F-D-RA are ROHS3 compliant with UL94 V-0 flammability rating.

Q: What is the operating temperature range for these connectors?

A: Both connectors operate across -55°C to 125°C, suitable for industrial and commercial applications.

Q: Can I use these connectors for board-to-board and cable applications?

A: Yes. Both connectors are specified for board-to-board or cable style applications with push-pull fastening.