SSW-140-22-S-D Equivalent & Substitute Parts

Part Overview

The SSW-140-22-S-D is an 80-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This connector features gold-plated mating contacts, through-hole solder termination, and push-pull fastening. The part is currently active in production with 1087 units in stock. Substitute parts are identified based on matching electrical and mechanical specifications within the SSW series rectangular connector family.

Substiute Parts

SSW-140-22-S-D

Samtec Inc.In Stock: 1122SSW-140-22-S-D Datasheet

Current PartRFQ

SSW-140-02-S-D

Samtec Inc.In Stock: 800SSW-140-02-S-D Datasheet

SimilarRFQ

SSW-140-02-S-D

Samtec Inc.In Stock: 800SSW-140-02-S-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-140-22-S-D are identified within the SSW series based on matching the following critical parameters:

• Connector Type & Position Count: Receptacle configuration with 80 positions
• Pitch & Row Spacing: 0.100" (2.54mm) mating pitch and row spacing
• Mounting & Termination: Through-hole solder termination with push-pull fastening
• Contact Specifications: Forked contact type with gold mating finish and 4.7A per contact current rating
• Environmental Ratings: Operating temperature range of -55°C ~ 125°C and UL94 V-0 flammability rating
• Material & Compliance: Liquid Crystal Polymer insulation with ROHS3 compliance

The SSW-140-02-S-D meets all these criteria and is therefore qualified as a direct substitute for the SSW-140-22-S-D within the SSW rectangular connector series.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-140-22-S-D and SSW-140-02-S-D are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on availability and inventory status. The SSW-140-22-S-D currently has 1087 units in stock, while the SSW-140-02-S-D has 771 units available. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications. The identical parameter set ensures functional interchangeability in board-to-board and cable connector applications requiring 80-position, 0.100" pitch receptacle configurations with gold-plated contacts and 4.7A per contact current capacity.

Frequently Asked Questions (FAQ)

Q: Are SSW-140-22-S-D and SSW-140-02-S-D fully interchangeable?

A: Yes. Both parts share identical electrical and mechanical specifications including connector type, position count, pitch spacing, contact materials, current ratings, and environmental operating ranges. They are direct substitutes within the SSW series.

Q: What determines substitution eligibility for SSW rectangular connectors?

A: Substitution is based on matching the following parameters: connector type (receptacle), position count (80), mating pitch (0.100"), row spacing (0.100"), mounting method (through-hole), termination type (solder), fastening mechanism (push-pull), contact finish (gold), and operating temperature range (-55°C ~ 125°C).

Q: Do both parts meet the same compliance standards?

A: Yes. Both SSW-140-22-S-D and SSW-140-02-S-D are ROHS3 compliant, carry UL94 V-0 flammability ratings, and share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: What is the current rating for these connectors?

A: Both parts are rated for 4.7A per contact, supporting applications requiring moderate to high current distribution across the 80-position connector array.

Q: Are there any differences in packaging or moisture sensitivity?

A: Both parts are supplied in bulk packaging. The SSW-140-22-S-D does not specify moisture sensitivity level, while the SSW-140-02-S-D is rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for either part.