SSW-134-01-G-P Equivalent & Substitute Parts

Part Overview

The SSW-134-01-G-P is a 34-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated forked contacts, solder termination, and push-pull fastening. The part is currently active in production with 849 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, application flexibility, or design alternatives within the same product series.

Substiute Parts

SSW-134-01-G-P

Samtec Inc.In Stock: 922SSW-134-01-G-P Datasheet

Current PartRFQ

SSW-134-01-G-S

Samtec Inc.In Stock: 868SSW-134-01-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-134-01-G-P is determined by strict equivalence across the following critical parameters:

• Manufacturer and Series: Samtec Inc. SSW series
• Connector Type and Position Count: 34-position receptacle
• Pitch and Mounting: 0.100" (2.54mm) through-hole
• Electrical Performance: 4.7A per contact, -55°C ~ 125°C operating range
• Material and Compliance: UL94 V-0, ROHS3 Compliant, Phosphor Bronze contacts with gold plating

The substitute part SSW-134-01-G-S meets all these criteria and is therefore electrically and mechanically interchangeable within the same application context.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-134-01-G-P and SSW-134-01-G-S are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and application requirements. Both parts carry ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications. The difference in part numbering reflects internal Samtec product variants; however, all specified parameters are equivalent, confirming full interchangeability for 34-position, 0.100" pitch through-hole receptacle connector applications.

Frequently Asked Questions (FAQ)

Q: Are SSW-134-01-G-P and SSW-134-01-G-S fully interchangeable?

A: Yes. Both parts are 34-position receptacles with identical pitch (0.100"), mounting type (through-hole), termination (solder), contact finish (gold), current rating (4.7A per contact), and operating temperature range (-55°C ~ 125°C). All electrical and mechanical parameters are equivalent.

Q: What is the difference between SSW-134-01-G-P and SSW-134-01-G-S?

A: The parts differ only in internal Samtec product designation. All specified technical parameters, including connector type, position count, pitch, mounting, termination, contact materials, and compliance certifications, are identical.

Q: Can I use SSW-134-01-G-S as a direct replacement for SSW-134-01-G-P in my PCB design?

A: Yes. Both parts have identical footprints, pin configurations, and electrical characteristics. No design modifications are required for substitution.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-134-01-G-P and SSW-134-01-G-S are ROHS3 compliant.

Q: What is the current rating per contact?

A: Both parts are rated for 4.7A per contact.

Q: What is the operating temperature range?

A: Both parts operate from -55°C to 125°C.

Q: Are these connectors suitable for board-to-board applications?

A: Yes. Both parts are designed for board-to-board or cable applications with push-pull fastening and solder termination.