SSW-132-01-L-D-N Equivalent & Substitute Parts

Part Overview

The SSW-132-01-L-D-N is a 64-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole connector features gold-plated mating contacts, forked contact design, and push-pull fastening. The part is currently active in production with 873 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory constraints require component flexibility.

Substiute Parts

SSW-132-01-L-D-N

Samtec Inc.In Stock: 950SSW-132-01-L-D-N Datasheet

Current PartRFQ

SSW-132-01-L-D

Samtec Inc.In Stock: 763SSW-132-01-L-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-132-01-L-D-N is determined by strict equivalence across the following critical parameters:

• Connector Type & Position Count: Receptacle configuration with 64 positions
• Pitch & Spacing: 0.100" (2.54mm) mating pitch and row spacing
• Mounting & Termination: Through-hole solder termination
• Contact Configuration: Forked contact type with gold mating finish
• Electrical Performance: 4.7A per contact current rating
• Environmental Compliance: UL94 V-0 flammability rating and ROHS3 compliance
• Operating Range: -55°C to 125°C temperature specification

The substitute part SSW-132-01-L-D maintains identical specifications across all critical parameters, differing only in moisture sensitivity level classification and REACH status documentation.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-132-01-L-D-N and SSW-132-01-L-D are active production parts manufactured by Samtec Inc. with identical electrical, mechanical, and environmental specifications. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications.

The primary distinction between these parts is the moisture sensitivity level classification. The SSW-132-01-L-D-N is classified as Not Applicable, while SSW-132-01-L-D carries an MSL rating of 1 (Unlimited). This difference does not affect functional compatibility or performance characteristics.

Selection between these parts should be based on inventory availability and supply chain requirements. The SSW-132-01-L-D-N currently maintains higher stock levels at 873 units compared to 671 units for SSW-132-01-L-D.

Frequently Asked Questions (FAQ)

Q: Are SSW-132-01-L-D-N and SSW-132-01-L-D electrically and mechanically interchangeable?

A: Yes. Both parts are functionally equivalent across all critical parameters including connector type, position count, pitch spacing, contact configuration, current rating, and operating temperature range.

Q: What does the difference in Moisture Sensitivity Level (MSL) mean for component handling?

A: The MSL classification indicates moisture absorption characteristics during storage and handling. SSW-132-01-L-D-N (Not Applicable) and SSW-132-01-L-D (MSL 1 - Unlimited) both accommodate standard storage conditions without special moisture control requirements.

Q: Can these connectors be used interchangeably in the same PCB design?

A: Yes. Both parts share identical mechanical dimensions, pitch spacing, and mounting specifications. PCB layouts designed for SSW-132-01-L-D-N will accommodate SSW-132-01-L-D without modification.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both SSW-132-01-L-D-N and SSW-132-01-L-D are ROHS3 compliant and carry UL94 V-0 flammability certification, meeting current regulatory requirements for electronic component applications.

Q: Which part should be selected for new designs?

A: Selection should be based on current inventory availability and supply chain lead times. Both parts are active production items with equivalent performance characteristics and regulatory compliance.