SSW-132-01-G-P Equivalent & Substitute Parts

Part Overview

The SSW-132-01-G-P is a 32-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated forked contacts, solder termination, and push-pull fastening. The part is currently active in production with 1,069 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are maintained across the same connector series, allowing for design flexibility and supply chain continuity.

Substiute Parts

SSW-132-01-G-P

Samtec Inc.In Stock: 1149SSW-132-01-G-P Datasheet

Current PartRFQ

SSW-132-01-G-S

Samtec Inc.In Stock: 691SSW-132-01-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-132-01-G-P is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (32)
• Pitch specification (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Contact finish (Gold)
• Current rating (4.7A per Contact)
• Operating temperature range (-55°C ~ 125°C)
• Flammability rating (UL94 V-0)
• RoHS compliance status (ROHS3 Compliant)

The SSW-132-01-G-S qualifies as a direct substitute based on identical specifications across all critical electrical and mechanical parameters. The difference between these parts is limited to packaging configuration, with no impact on functional performance or compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-132-01-G-P and SSW-132-01-G-S are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and supply availability. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications. The SSW-132-01-G-P is currently available with 1,069 units in stock, while the SSW-132-01-G-S has 641 units available. Component selection should align with procurement lead times and inventory management strategies.

Frequently Asked Questions (FAQ)

Q: Can SSW-132-01-G-S be used as a direct replacement for SSW-132-01-G-P?

A: Yes. Both parts share identical electrical and mechanical specifications, including connector type, position count, pitch, mounting method, contact finish, current rating, and operating temperature range. The parts differ only in packaging configuration.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution is valid when the following parameters remain constant: 32-position receptacle configuration, 0.100" (2.54mm) pitch, through-hole mounting, gold contact finish, 4.7A per contact current rating, -55°C to 125°C operating temperature, and UL94 V-0 flammability rating.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-132-01-G-P and SSW-132-01-G-S are ROHS3 compliant and meet regulatory requirements for restricted substance use.

Q: What is the difference between the SSW-132-01-G-P and SSW-132-01-G-S part numbers?

A: The part numbers differ in their packaging designation. The "-P" and "-S" suffixes indicate different packaging configurations. All functional and electrical specifications remain identical.

Q: Are there any compatibility concerns when switching between these parts?

A: No compatibility concerns exist. Both parts are mechanically and electrically equivalent with identical PCB footprints, contact spacing, and mating interface specifications.