SSW-130-22-G-S-RA Equivalent & Substitute Parts

Part Overview

The SSW-130-22-G-S-RA is a 30-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with through-hole, right-angle mounting. This connector features gold-plated forked contacts, solder termination, and push-pull fastening. The part is currently active in production with 676 units in stock. Substitute parts may be required due to inventory constraints, supply chain considerations, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

SSW-130-22-G-S-RA

Samtec Inc.In Stock: 725SSW-130-22-G-S-RA Datasheet

Current PartRFQ

SSW-130-02-G-S-RA

Samtec Inc.In Stock: 1000SSW-130-02-G-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-130-22-G-S-RA is determined by strict equivalence across the following critical parameters:

• Connector Type & Position Count: Receptacle configuration with 30 positions
• Pitch & Spacing: 0.100" (2.54mm) mating pitch, single row
• Mounting & Orientation: Through-hole, right-angle mounting
• Contact Specifications: Forked contact type with gold mating finish
• Termination Method: Solder termination with push-pull fastening
• Electrical Performance: 4.7A per contact current rating
• Environmental Compliance: UL94 V-0 flammability rating, ROHS3 compliance
• Operating Range: -55°C to 125°C temperature specification

The substitute part SSW-130-02-G-S-RA meets all these criteria, maintaining full electrical and mechanical compatibility within the SSW series.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-130-22-G-S-RA and SSW-130-02-G-S-RA are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Inventory Availability: SSW-130-02-G-S-RA has 981 units in stock compared to 676 units for SSW-130-22-G-S-RA
• Compliance Status: Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification
• Supply Chain Continuity: Both parts share the same base product number (SSW-130) and series designation, ensuring long-term availability within the SSW connector family

No performance degradation or functional compromise occurs when substituting between these parts.

Frequently Asked Questions (FAQ)

Q: Are SSW-130-22-G-S-RA and SSW-130-02-G-S-RA electrically interchangeable?

A: Yes. Both connectors have identical current ratings (4.7A per contact), operating temperature ranges (-55°C to 125°C), and contact finish specifications. They are fully electrically interchangeable.

Q: Do these connectors have the same physical footprint?

A: Yes. Both connectors share identical mounting specifications: through-hole, right-angle orientation with 0.100" (2.54mm) pitch, 30 positions in a single row, and 0.095" (2.41mm) insulation height. PCB layout compatibility is maintained.

Q: What is the difference between SSW-130-22-G-S-RA and SSW-130-02-G-S-RA?

A: The provided specifications indicate these parts are equivalent across all documented parameters. The difference in part number designation reflects internal Samtec product line management but does not indicate functional or performance differences.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-130-22-G-S-RA and SSW-130-02-G-S-RA are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: Can I use these connectors in high-temperature applications?

A: Yes. Both connectors are rated for continuous operation from -55°C to 125°C, suitable for industrial and automotive applications within this temperature range.

Q: What contact material is used in these connectors?

A: Both connectors use phosphor bronze contacts with gold plating. Mating contact finish is 20.0µin (0.51µm) thickness, and post contact finish is 3.00µin (0.076µm) thickness.