SSW-130-21-F-D Equivalent & Substitute Parts

Part Overview

The SSW-130-21-F-D is a 60-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole connector features gold-plated mating contacts, forked contact design, and push-pull fastening. The part is currently active in production with 791 units in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and connector interface standards to ensure direct functional replacement in circuit designs.

Substiute Parts

SSW-130-21-F-D

Samtec Inc.In Stock: 844SSW-130-21-F-D Datasheet

Current PartRFQ

SSW-130-01-F-D

Samtec Inc.In Stock: 1082SSW-130-01-F-D Datasheet

SimilarRFQ

SSW-130-01-FM-D

Samtec Inc.In Stock: 767SSW-130-01-FM-D Datasheet

SimilarRFQ

SSW-130-21-FM-D

Samtec Inc.In Stock: 1075SSW-130-21-FM-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-130-21-F-D are identified within the Samtec SSW series based on matching the following critical parameters:

• Number of Positions: 60
• Pitch - Mating: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Connector Type: Receptacle
• Contact Type: Forked
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Finish - Mating: Gold
• Insulation Material: Liquid Crystal Polymer (LCP)
• Operating Temperature: -55°C ~ 125°C
• Current Rating: 4.7A per Contact
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant

The substitute parts SSW-130-01-F-D, SSW-130-01-FM-D, and SSW-130-21-FM-D maintain identical electrical and mechanical specifications. Variations in part numbering reflect differences in contact finish post material or moisture sensitivity level classification, which do not affect functional interchangeability in standard applications.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed—SSW-130-01-F-D, SSW-130-01-FM-D, and SSW-130-21-FM-D—are functionally equivalent to the SSW-130-21-F-D and maintain identical electrical and mechanical specifications. All parts are active products with ROHS3 compliance and UL94 V-0 flammability certification.

Selection among these parts should be based on:

• Inventory availability: SSW-130-01-F-D (1008 units), SSW-130-21-FM-D (985 units), SSW-130-21-F-D (791 units), and SSW-130-01-FM-D (686 units) are all in stock.
• Moisture sensitivity level requirements: SSW-130-21-FM-D is classified as MSL 1 (Unlimited), while other variants are not applicable for MSL classification.
• Lead time and supply chain considerations: All parts are manufactured by Samtec Inc. and share the same base product number SSW-130.

Frequently Asked Questions (FAQ)

Q: Can SSW-130-01-F-D be used as a direct replacement for SSW-130-21-F-D?

A: Yes. Both parts maintain identical electrical and mechanical specifications, including 60 positions, 0.100" pitch, gold-plated mating contacts, 4.7A per contact current rating, and -55°C to 125°C operating temperature range. The parts are mechanically and electrically interchangeable.

Q: What is the difference between SSW-130-21-F-D and SSW-130-21-FM-D?

A: The primary difference is the moisture sensitivity level (MSL) classification. SSW-130-21-FM-D is classified as MSL 1 (Unlimited), indicating enhanced moisture resistance. Both parts are otherwise identical in electrical and mechanical specifications.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts—SSW-130-01-F-D, SSW-130-01-FM-D, and SSW-130-21-FM-D—are ROHS3 compliant and meet the same environmental and regulatory standards as the SSW-130-21-F-D.

Q: What determines whether a part can substitute for SSW-130-21-F-D?

A: Substitution is determined by matching critical parameters: 60-position count, 0.100" (2.54mm) mating pitch, 2-row configuration, receptacle connector type, forked contact design, through-hole mounting, solder termination, push-pull fastening, gold mating contact finish, and identical operating temperature and current ratings.

Q: Can I use these connectors in high-temperature applications?

A: Yes. All listed parts support the operating temperature range of -55°C to 125°C and carry UL94 V-0 flammability certification, making them suitable for industrial and high-reliability applications within this temperature range.

Q: Are there inventory considerations when selecting a substitute?

A: Yes. Current inventory levels vary: SSW-130-01-F-D has 1008 units, SSW-130-21-FM-D has 985 units, SSW-130-21-F-D has 791 units, and SSW-130-01-FM-D has 686 units in stock. Availability may influence selection for immediate procurement needs.