SSW-125-22-S-D Equivalent & Substitute Parts

Part Overview

The SSW-125-22-S-D is a 50-position rectangular receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This connector features gold-plated mating contacts, through-hole solder termination, and push-pull fastening. The part is currently active in production with 1078 units in stock.

Identifying equivalent and substitute parts is necessary when the primary part becomes unavailable, when design revisions require alternative fastening configurations, or when supply chain optimization requires component consolidation across similar product lines.

Substiute Parts

SSW-125-22-S-D

Samtec Inc.In Stock: 1160SSW-125-22-S-D Datasheet

Current PartRFQ

SSW-125-02-S-D

Samtec Inc.In Stock: 856SSW-125-02-S-D Datasheet

SimilarRFQ

SSW-125-02-S-D

Samtec Inc.In Stock: 856SSW-125-02-S-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-125-22-S-D are identified based on strict electrical and mechanical compatibility criteria. The following parameters must remain constant for a part to qualify as a direct substitute:

• Connector type (Receptacle)
• Number of positions (50)
• Pitch spacing (0.100" / 2.54mm)
• Number of rows (2)
• Row spacing (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Termination method (Solder)
• Contact finish - mating (Gold)
• Current rating (4.7A per Contact)
• Operating temperature range (-55°C ~ 125°C)
• Material flammability rating (UL94 V-0)
• RoHS compliance (ROHS3)

The SSW-125-02-S-D meets all these criteria and qualifies as a functional equivalent, despite differences in product status and moisture sensitivity level classification.

Parameter Comparison

Engineering Selection Recommendations

The SSW-125-02-S-D is electrically and mechanically equivalent to the SSW-125-22-S-D. Both parts share identical connector specifications, contact ratings, and environmental compliance certifications. The primary distinction is product availability status: the SSW-125-22-S-D is currently active in production, while the SSW-125-02-S-D is discontinued at DiGi Electronics.

For new designs, the SSW-125-22-S-D is the preferred selection due to active production status and assured long-term availability. The SSW-125-02-S-D may be considered for legacy system maintenance or when existing inventory is available through alternative distribution channels, provided supply continuity can be established.

Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications.

Frequently Asked Questions (FAQ)

Q: Can the SSW-125-02-S-D be used as a direct replacement for the SSW-125-22-S-D in existing designs?

A: Yes. The SSW-125-02-S-D meets all electrical and mechanical specifications of the SSW-125-22-S-D, including connector type, position count, pitch spacing, current rating, and operating temperature range. Substitution is electrically and mechanically valid.

Q: What is the difference between the two part numbers?

A: The SSW-125-22-S-D and SSW-125-02-S-D differ in product status and moisture sensitivity level classification. The SSW-125-22-S-D is active in production, while the SSW-125-02-S-D is discontinued at DiGi Electronics. Both parts are functionally identical in electrical and mechanical performance.

Q: Are both parts RoHS compliant?

A: Yes. Both the SSW-125-22-S-D and SSW-125-02-S-D are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: What is the current rating for these connectors?

A: Both connectors are rated for 4.7A per contact, supporting applications requiring moderate current distribution across multiple signal or power lines.

Q: What mounting and termination methods are used?

A: Both parts use through-hole mounting with solder termination, suitable for PCB assembly processes requiring permanent mechanical and electrical connections.