SSW-124-22-S-S-RA Equivalent & Substitute Parts

Part Overview

The SSW-124-22-S-S-RA is a 24-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications. This connector features a 0.100" (2.54mm) pitch, through-hole right-angle mounting, and gold-plated mating contacts. The part maintains active product status and is ROHS3 compliant, making it suitable for modern electronic assemblies requiring reliable interconnection in standard pitch applications.

Substitute parts are identified when they maintain identical or functionally equivalent electrical and mechanical parameters, allowing direct replacement in circuit designs without redesign requirements.

Substiute Parts

SSW-124-22-S-S-RA

Samtec Inc.In Stock: 1241SSW-124-22-S-S-RA Datasheet

Current PartRFQ

SSW-124-02-S-S-RA

Samtec Inc.In Stock: 1037SSW-124-02-S-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-124-22-S-S-RA is determined by the following critical parameters:

• 24-position configuration
• 0.100" (2.54mm) mating pitch
• Receptacle connector type with forked contacts
• Through-hole, right-angle mounting orientation
• Gold contact finish at 30.0µin (0.76µm) thickness
• 4.7A per contact current rating
• Operating temperature range of -55°C to 125°C
• UL94 V-0 flammability rating
• ROHS3 compliance

The SSW-124-02-S-S-RA meets all these criteria and qualifies as a direct substitute. Both parts share the same base product number (SSW-124), series designation, and core electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-124-22-S-S-RA and SSW-124-02-S-S-RA maintain active product status from Samtec Inc. and carry ROHS3 compliance certification. The parts are classified under the same ECCN (EAR99) and HTSUS codes, confirming regulatory equivalence.

Selection between these parts may be based on inventory availability. The SSW-124-22-S-S-RA currently has 1142 pieces in stock, while the SSW-124-02-S-S-RA has 944 pieces available. Both parts are suitable for applications requiring 24-position rectangular connectors with standard 0.100" pitch spacing and gold-plated contacts in through-hole right-angle configurations.

Frequently Asked Questions (FAQ)

Q: Can SSW-124-02-S-S-RA replace SSW-124-22-S-S-RA in existing designs?

A: Yes. Both parts share identical electrical and mechanical specifications, including connector type, position count, mating pitch, mounting orientation, contact finish, current rating, and operating temperature range. Direct substitution is supported without circuit redesign.

Q: What is the difference between these two part numbers?

A: The parts are functionally equivalent. The difference in part numbering reflects Samtec's internal product designation system. Both parts belong to the SSW series and share the same base product number (SSW-124).

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant, carry the same ECCN classification (EAR99), and share identical HTSUS codes. Regulatory and environmental compliance is equivalent.

Q: What is the moisture sensitivity level for these connectors?

A: The SSW-124-22-S-S-RA is not applicable for moisture sensitivity level classification. The SSW-124-02-S-S-RA is classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Can these connectors be used in high-temperature applications?

A: Yes. Both parts are rated for operating temperatures from -55°C to 125°C, supporting applications across industrial and commercial temperature ranges.