SSW-117-22-G-D Equivalent & Substitute Parts

Part Overview

The SSW-117-22-G-D is a 34-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This connector features gold-plated forked contacts, through-hole solder termination, and push-pull fastening. The part is currently active in production with 889 units in stock. Substitute parts are identified when identical electrical and mechanical specifications are required but alternative part numbers offer improved availability or inventory advantages.

Substiute Parts

SSW-117-22-G-D

Samtec Inc.In Stock: 949SSW-117-22-G-D Datasheet

Current PartRFQ

SSW-117-02-G-D

Samtec Inc.In Stock: 1335SSW-117-02-G-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-117-02-G-D qualifies as a direct substitute for the SSW-117-22-G-D based on identical specifications across all critical electrical and mechanical parameters. Both parts share the same base product number (SSW-117) and are differentiated only by internal Samtec designation codes that do not affect functional compatibility.

Substitution is valid when the following parameters match:

• Connector type, position count, and row configuration
• Pitch and row spacing dimensions
• Mounting method and termination type
• Contact material, finish type, and current rating
• Operating temperature range
• Compliance certifications (RoHS3, UL94 V-0)

Parameter Comparison

Engineering Selection Recommendations

Both SSW-117-22-G-D and SSW-117-02-G-D are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and lead time requirements. The SSW-117-02-G-D offers higher stock levels (1322 units versus 889 units), which may provide supply chain advantages for high-volume applications. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, ensuring regulatory compatibility across industrial and commercial applications.

Frequently Asked Questions (FAQ)

Q: Are SSW-117-22-G-D and SSW-117-02-G-D electrically interchangeable?

A: Yes. Both parts have identical electrical specifications including 34-position configuration, 0.100" pitch, 4.7A per contact current rating, and -55°C to 125°C operating temperature range.

Q: Do these connectors have the same physical dimensions?

A: Yes. Both parts share identical mechanical specifications including 0.335" insulation height, 0.194" contact post length, and 2-row configuration with 0.100" row spacing.

Q: Can I substitute SSW-117-02-G-D for SSW-117-22-G-D in existing designs?

A: Yes. The parts are functionally equivalent and can be used interchangeably without design modifications. Both use the same base product number (SSW-117) and share all critical parameters.

Q: What is the difference between these two part numbers?

A: The difference is limited to Samtec's internal designation codes. Both parts are manufactured to identical specifications and are functionally equivalent.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-117-22-G-D and SSW-117-02-G-D are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: Which part should I order for new designs?

A: Either part is suitable for new designs. Selection should be based on current inventory availability and supply chain lead times. The SSW-117-02-G-D currently has higher stock levels.