SSW-117-22-F-D-RA Equivalent & Substitute Parts

Part Overview

The SSW-117-22-F-D-RA is a 34-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole, right-angle mounted connector features gold-plated mating contacts and tin-plated posts, operating across -55°C to 125°C with a current rating of 4.7A per contact. The part maintains active product status and full RoHS3 compliance. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and access to alternative inventory levels when the primary part number becomes unavailable or when procurement optimization is required.

Substiute Parts

SSW-117-22-F-D-RA

Samtec Inc.In Stock: 923SSW-117-22-F-D-RA Datasheet

Current PartRFQ

SSW-117-02-F-D-RA

Samtec Inc.In Stock: 1570SSW-117-02-F-D-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-117-22-F-D-RA is determined by strict equivalence across the following critical parameters:

• Connector Type & Configuration: Receptacle, 34-position, 2-row layout
• Pitch & Spacing: 0.100" (2.54mm) mating pitch and row spacing
• Mounting & Termination: Through-hole, right-angle orientation with solder termination
• Contact System: Forked contact type with gold mating finish and tin post finish
• Electrical Performance: 4.7A per contact current rating
• Environmental Compliance: UL94 V-0 flammability rating, -55°C to 125°C operating range, ROHS3 compliance

The substitute part SSW-117-02-F-D-RA shares identical specifications across all these parameters, confirming direct substitutability within the SSW series from Samtec Inc.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-117-22-F-D-RA and SSW-117-02-F-D-RA maintain active product status with full ROHS3 compliance and identical electrical, mechanical, and environmental specifications. Selection between these parts should be based on inventory availability and procurement lead times. The SSW-117-02-F-D-RA currently maintains higher inventory levels (1533 pcs vs. 873 pcs), making it a viable alternative when supply optimization or expedited procurement is required. Both parts carry identical compliance certifications (UL94 V-0, EAR99, HTSUS 8536.69.4040) and are suitable for equivalent circuit applications without design modification.

Frequently Asked Questions (FAQ)

Q: Can SSW-117-02-F-D-RA be used as a direct replacement for SSW-117-22-F-D-RA?

A: Yes. Both parts are functionally equivalent receptacle connectors with identical 34-position, 2-row configurations, 0.100" pitch spacing, through-hole right-angle mounting, and 4.7A per contact current ratings. No circuit or PCB layout modifications are required.

Q: What is the difference between these two part numbers?

A: The part numbers differ in their internal Samtec designation codes (22 vs. 02), but all specified electrical, mechanical, and environmental parameters are identical. Both are manufactured by Samtec Inc. within the SSW series.

Q: Are there any compliance or certification differences?

A: No. Both parts carry identical certifications: ROHS3 compliance, UL94 V-0 flammability rating, EAR99 export classification, and HTSUS code 8536.69.4040.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 125°C, suitable for industrial and commercial temperature environments.

Q: Can these connectors handle the same current levels?

A: Yes. Both parts are rated for 4.7A per contact, providing identical electrical performance for power distribution and signal applications.

Q: Are there any packaging or inventory considerations?

A: Both parts are supplied in bulk packaging. The SSW-117-02-F-D-RA has higher current inventory availability (1533 pcs) compared to SSW-117-22-F-D-RA (873 pcs), which may influence procurement decisions for volume orders.