SSW-116-22-G-D Equivalent & Substitute Parts

Part Overview

The SSW-116-22-G-D is a 32-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This connector features gold-plated forked contacts, through-hole solder termination, and push-pull fastening. The part is currently active in production with 1075 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory constraints require component flexibility.

Substiute Parts

SSW-116-22-G-D

Samtec Inc.In Stock: 1119SSW-116-22-G-D Datasheet

Current PartRFQ

SSW-116-02-G-D

Samtec Inc.In Stock: 1045SSW-116-02-G-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-116-22-G-D has one identified substitute: SSW-116-02-G-D. Both parts share the same base product number (SSW-116) and are functionally equivalent based on the following critical parameters:

• 32-position receptacle configuration
• 0.100" (2.54mm) mating pitch
• 2-row layout with 0.100" (2.54mm) row spacing
• Through-hole solder termination
• Forked contact type with gold plating
• 4.7A per contact current rating
• -55°C ~ 125°C operating temperature range
• UL94 V-0 flammability rating
• ROHS3 compliance

The substitution is valid because both parts maintain identical electrical and mechanical specifications across all critical interface parameters.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-116-22-G-D and SSW-116-02-G-D are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and lead time requirements. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for equivalent applications. The SSW-116-22-G-D currently has higher inventory availability at 1075 units compared to 994 units for the SSW-116-02-G-D.

Frequently Asked Questions (FAQ)

Q: Can SSW-116-02-G-D be used as a direct replacement for SSW-116-22-G-D?

A: Yes. Both parts are functionally equivalent across all critical parameters including connector type, position count, pitch spacing, contact configuration, and electrical ratings. Direct substitution is valid for board-to-board and cable applications.

Q: Are there any differences in the physical dimensions between these parts?

A: No. Both parts share identical insulation height (0.335"), contact length (0.194"), and row spacing (0.100"). PCB footprints are identical.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SSW-116-22-G-D and SSW-116-02-G-D are ROHS3 compliant and carry UL94 V-0 flammability ratings. Both are classified as EAR99 for export control purposes.

Q: What is the current rating for these connectors?

A: Both parts are rated for 4.7A per contact with an operating temperature range of -55°C to 125°C.

Q: Are there any packaging differences between these substitute parts?

A: Both parts are supplied in bulk packaging. No special handling or packaging variations exist between the two part numbers.