SSW-116-22-F-D-RA Equivalent & Substitute Parts

Part Overview

The SSW-116-22-F-D-RA is a 32-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications. This through-hole, right-angle connector features gold-plated mating contacts and tin-plated posts, operating across -55°C to 125°C. The connector is actively produced and ROHS3 compliant, making it suitable for industrial and commercial applications requiring reliable rectangular connector solutions.

Identifying equivalent and substitute parts is necessary when managing component availability, optimizing procurement timelines, or addressing supply chain constraints while maintaining electrical and mechanical compatibility.

Substiute Parts

SSW-116-22-F-D-RA

Samtec Inc.In Stock: 1195SSW-116-22-F-D-RA Datasheet

Current PartRFQ

SSW-116-02-F-D-RA

Samtec Inc.In Stock: 1038SSW-116-02-F-D-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-116-22-F-D-RA is determined by strict alignment of the following critical parameters:

• Connector Type & Position Count: Receptacle configuration with 32 positions
• Pitch & Row Spacing: 0.100" (2.54mm) mating pitch and row spacing
• Mounting Configuration: Through-hole, right-angle orientation
• Contact System: Forked contact type with gold mating finish and tin post finish
• Electrical Performance: 4.7A per contact current rating
• Environmental Compliance: Operating temperature range -55°C to 125°C, UL94 V-0 flammability rating, ROHS3 compliance

The SSW-116-02-F-D-RA meets all substitution criteria, sharing identical electrical, mechanical, and environmental specifications with the main part number.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-116-22-F-D-RA and SSW-116-02-F-D-RA are active products from Samtec Inc. with identical electrical, mechanical, and environmental specifications. Selection between these parts should be based on:

• Inventory Availability: SSW-116-22-F-D-RA has 1164 pieces in stock; SSW-116-02-F-D-RA has 996 pieces in stock
• Compliance Status: Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification
• Procurement Timeline: Either part is suitable for immediate deployment in applications requiring 32-position, 0.100" pitch rectangular connectors with through-hole, right-angle mounting

No technical limitations exist for substitution between these part numbers.

Frequently Asked Questions (FAQ)

Q: Can SSW-116-02-F-D-RA be used as a direct replacement for SSW-116-22-F-D-RA?

A: Yes. Both connectors share identical specifications across all critical parameters: 32-position receptacle configuration, 0.100" (2.54mm) pitch, through-hole right-angle mounting, gold mating contacts, tin post finish, 4.7A per contact current rating, and -55°C to 125°C operating temperature range.

Q: Are there any mechanical compatibility concerns when substituting between these parts?

A: No. Both parts feature identical mounting type (through-hole, right-angle), insulation height (0.195"), contact length (0.100"), and row spacing (0.100"). PCB footprints and mating interface dimensions are equivalent.

Q: Do both parts meet the same compliance and certification standards?

A: Yes. Both SSW-116-22-F-D-RA and SSW-116-02-F-D-RA are ROHS3 compliant, carry UL94 V-0 flammability rating, and are classified as active products by Samtec Inc.

Q: What determines substitution eligibility for Samtec SSW series connectors?

A: Substitution is valid when the following parameters match: connector type, position count, mating pitch, row spacing, mounting orientation, contact finish specifications, current rating, operating temperature range, and compliance certifications.

Q: Are there differences in contact material or finish thickness between these parts?

A: No. Both parts use phosphor bronze contact material with identical finish specifications: gold mating contact finish at 3.00µin (0.076µm) thickness and tin post finish.