SSW-116-01-F-P Equivalent & Substitute Parts

Part Overview

The SSW-116-01-F-P is a 16-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated mating contacts, tin-plated posts, and is rated for 4.7A per contact with an operating temperature range of -55°C to 125°C. The part is currently active in production with 878 units in stock. Equivalent and substitute parts are identified to provide design flexibility, ensure supply chain continuity, and support component availability across manufacturing cycles.

Substiute Parts

SSW-116-01-F-P

Samtec Inc.In Stock: 925SSW-116-01-F-P Datasheet

Current PartRFQ

SSW-116-01-F-S

Samtec Inc.In Stock: 1854SSW-116-01-F-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-116-01-F-P has one identified substitute: SSW-116-01-F-S. Both parts share the same base product number (SSW-116) and are manufactured by Samtec Inc. within the same SSW series. Substitution is valid based on the following matching parameters:

• Connector type: Receptacle
• Number of positions: 16
• Pitch - mating: 0.100" (2.54mm)
• Mounting type: Through hole
• Contact type: Forked
• Contact finish - mating: Gold
• Contact finish - post: Tin
• Current rating: 4.7A per contact
• Operating temperature: -55°C ~ 125°C
• Insulation material: Liquid Crystal Polymer (LCP)
• Material flammability rating: UL94 V-0
• RoHS status: ROHS3 Compliant

Both parts are functionally equivalent for applications requiring a 16-position, 0.100" pitch receptacle connector with gold mating contacts and tin-plated posts.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-116-01-F-P and SSW-116-01-F-S are active production parts manufactured by Samtec Inc. and are ROHS3 compliant. The parts are electrically and mechanically equivalent across all critical parameters including connector type, position count, pitch, contact materials, finishes, current rating, and operating temperature range.

Selection between these parts should be based on availability and inventory requirements. The SSW-116-01-F-S currently has higher inventory availability (1781 units) compared to the SSW-116-01-F-P (878 units). Both parts carry the same ECCN (EAR99) and HTSUS classification, ensuring consistent regulatory treatment.

Frequently Asked Questions (FAQ)

Q: Are SSW-116-01-F-P and SSW-116-01-F-S electrically interchangeable?

A: Yes. Both parts are 16-position receptacle connectors with identical electrical specifications: 0.100" (2.54mm) pitch, 4.7A per contact current rating, -55°C to 125°C operating temperature, and gold-plated mating contacts with tin-plated posts.

Q: Are these connectors mechanically compatible with the same mating connectors?

A: Yes. Both parts share identical mechanical dimensions, mounting type (through hole), contact type (forked), and insulation material (LCP), ensuring compatibility with the same mating connectors.

Q: What is the difference between SSW-116-01-F-P and SSW-116-01-F-S?

A: The primary difference is the Moisture Sensitivity Level (MSL) designation. SSW-116-01-F-P is listed as Not Applicable, while SSW-116-01-F-S is rated MSL 1 (Unlimited). Both parts are otherwise identical in electrical and mechanical specifications.

Q: Can I use SSW-116-01-F-S as a direct replacement for SSW-116-01-F-P?

A: Yes. The parts are functionally equivalent and can be used interchangeably in applications requiring a 16-position, 0.100" pitch receptacle connector with the specified electrical and mechanical characteristics.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-116-01-F-P and SSW-116-01-F-S are ROHS3 compliant.

Q: What is the through-hole mounting configuration for these connectors?

A: Both connectors are designed for through-hole PCB mounting with solder termination and push-pull fastening type.