SSW-115-01-S-D Equivalent & Substitute Parts

Part Overview

The SSW-115-01-S-D is a 30-position rectangular receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This connector features gold-plated mating contacts, through-hole solder termination, and push-pull fastening. The part is currently active in production with ROHS3 compliance and UL94 V-0 flammability rating. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector interface, enabling direct functional replacement in applications where the original part becomes unavailable or when alternative sourcing is required.

Substiute Parts

SSW-115-01-S-D

Samtec Inc.In Stock: 944SSW-115-01-S-D Datasheet

Current PartRFQ

1-534206-5

TE Connectivity AMP ConnectorsIn Stock: 19351-534206-5 Datasheet

MFR RecommendedRFQ

6-534206-5

TE Connectivity AMP ConnectorsIn Stock: 20196-534206-5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-115-01-S-D are qualified based on the following critical parameters that define functional equivalence:

• Connector Type & Position Count: Both substitute parts maintain receptacle configuration with 30 positions
• Pitch & Row Spacing: Mating pitch of 0.100" (2.54mm) and row spacing of 0.100" (2.54mm) are preserved across all substitutes
• Mounting & Termination: Through-hole solder termination and push-pull fastening are maintained
• Contact Interface: Gold-plated mating contacts with 30.0µin (0.76µm) thickness ensure electrical compatibility
• Mechanical Compatibility: Board-to-board or cable style configuration remains consistent

The identified substitutes are TE Connectivity AMP Connectors parts 1-534206-5 and 6-534206-5 from the AMPMODU Mod II series. Both parts satisfy the core electrical and mechanical requirements for direct functional replacement.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 6-534206-5

The 6-534206-5 is the preferred substitute for the SSW-115-01-S-D. This part maintains full compliance with RoHS regulations and carries UL94 V-0 flammability certification, matching the regulatory profile of the original part. Both parts are active in production status, ensuring long-term availability. The operating temperature range of -65°C ~ 125°C in the substitute exceeds the original specification of -55°C ~ 125°C, providing extended low-temperature capability.

Secondary Substitute: 1-534206-5

The 1-534206-5 provides functional equivalence for applications where RoHS compliance is not a design requirement. This part is also active in production and offers the same mechanical and electrical interface characteristics. However, this substitute does not meet RoHS compliance standards and lacks specified flammability certification, making it suitable only for legacy or non-regulated applications.

Current Rating Consideration

Both substitute parts are rated at 2A per contact, compared to the original part's 4.7A per contact rating. Applications requiring the full 4.7A per contact current capacity must evaluate whether the reduced rating is acceptable for the intended circuit design.

Frequently Asked Questions (FAQ)

Q: Can the 6-534206-5 be used as a direct replacement for the SSW-115-01-S-D?

A: Yes. The 6-534206-5 maintains identical mating pitch (0.100"), position count (30), row configuration (2 rows), mounting type (through-hole), termination method (solder), and contact finish (gold, 30.0µin). Both parts are active in production with RoHS compliance and UL94 V-0 certification.

Q: What is the difference between the two TE Connectivity substitutes?

A: Both 1-534206-5 and 6-534206-5 share identical mechanical and electrical interface specifications. The primary differences are RoHS compliance status (1-534206-5 is non-compliant; 6-534206-5 is compliant) and flammability certification (6-534206-5 carries UL94 V-0 rating). For new designs, 6-534206-5 is the appropriate choice.

Q: Are there packaging differences between the main part and substitutes?

A: Yes. The SSW-115-01-S-D is supplied in bulk packaging, while both TE Connectivity substitutes are supplied in tube packaging. This affects handling and storage procedures but does not impact electrical or mechanical performance.

Q: How does the current rating difference affect substitution?

A: The SSW-115-01-S-D is rated at 4.7A per contact, while both substitutes are rated at 2A per contact. Applications operating at currents between 2A and 4.7A per contact must confirm that the reduced rating is acceptable for the circuit design. For applications operating below 2A per contact, the substitutes are fully qualified.

Q: What is the operating temperature range for each part?

A: The SSW-115-01-S-D operates from -55°C to 125°C. Both TE Connectivity substitutes operate from -65°C to 125°C, providing 10°C additional low-temperature capability. For applications requiring operation below -55°C, the substitutes offer extended performance.

Q: Are all three parts currently available?

A: Yes. The SSW-115-01-S-D, 1-534206-5, and 6-534206-5 are all listed as active products in current production, ensuring availability for new designs and replacement applications.