SSW-114-01-S-S Equivalent & Substitute Parts

Part Overview

The SSW-114-01-S-S is a 14-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated mating contacts, forked contact geometry, and push-pull fastening. The part is currently active in production with 1140 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part is unavailable or supply constraints exist.

Substiute Parts

SSW-114-01-S-S

Samtec Inc.In Stock: 1191SSW-114-01-S-S Datasheet

Current PartRFQ

1-534237-2

TE Connectivity AMP ConnectorsIn Stock: 22831-534237-2 Datasheet

MFR RecommendedRFQ

6-534237-2

TE Connectivity AMP ConnectorsIn Stock: 56506-534237-2 Datasheet

MFR RecommendedRFQ

929850-01-14-RB

3MIn Stock: 1274929850-01-14-RB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-114-01-S-S are qualified based on the following critical parameters that must align with the original specification:

• Connector Type & Position Count: All substitutes must be 14-position receptacle connectors
• Pitch & Mounting: 0.100" (2.54mm) pitch with through-hole solder termination
• Fastening & Contact Finish: Push-pull fastening with gold-plated mating contacts at 30.0µin thickness
• Insulation Color & Material: Black insulation
• Compliance: ROHS3 compliance and EAR99 classification

The identified substitutes (1-534237-2, 6-534237-2, and 929850-01-14-RB) meet these core electrical and mechanical requirements. Variations in contact current rating, operating temperature range, and insulation material do not preclude substitution when the application requirements fall within the substitute part's rated parameters.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 6-534237-2 (TE Connectivity)

The 6-534237-2 is the preferred substitute due to complete alignment with the SSW-114-01-S-S on all critical parameters: 14-position receptacle, 0.100" pitch, through-hole solder termination, push-pull fastening, gold mating contacts at 30.0µin thickness, and UL94 V-0 flammability rating. Both parts carry ROHS3 compliance. The 6-534237-2 offers superior inventory availability (5626 units) and is packaged in tube format. The operating temperature range extends to -65°C, providing broader environmental coverage than the original part.

Secondary Substitute: 1-534237-2 (TE Connectivity)

The 1-534237-2 shares identical core specifications with the 6-534237-2 but lacks specified flammability rating documentation. This part is suitable for applications where UL94 V-0 certification is not a design requirement. Inventory availability is adequate at 2216 units.

Tertiary Substitute: 929850-01-14-RB (3M)

The 929850-01-14-RB meets all fundamental connector specifications and carries UL94 V-0 certification. However, the operating temperature range (-40°C ~ 105°C) is narrower than the original part, limiting use in applications requiring -55°C operation. This part is suitable for standard industrial temperature environments and offers bulk packaging equivalent to the original.

All substitute parts are active products with current production status and ROHS compliance, ensuring long-term availability and regulatory alignment.

Frequently Asked Questions (FAQ)

Q: Can the 1-534237-2 and 6-534237-2 be used interchangeably with the SSW-114-01-S-S?

A: Both TE Connectivity parts share identical electrical and mechanical specifications with the SSW-114-01-S-S on all critical parameters: 14 positions, 0.100" pitch, through-hole solder termination, push-pull fastening, and gold mating contacts. The 6-534237-2 is preferred due to documented UL94 V-0 flammability rating. Both are direct substitutes when application requirements fall within their rated parameters.

Q: What is the impact of the lower current rating on substitute parts?

A: The substitute parts (1-534237-2, 6-534237-2, 929850-01-14-RB) are rated at 2A per contact compared to the SSW-114-01-S-S at 4.7A per contact. Substitution is valid only when the application current per contact does not exceed 2A. For applications requiring the full 4.7A rating, the original SSW-114-01-S-S must be used.

Q: Are there temperature limitations with the 929850-01-14-RB substitute?

A: The 929850-01-14-RB operates within -40°C ~ 105°C, compared to the SSW-114-01-S-S range of -55°C ~ 125°C. This part is not suitable for applications requiring operation below -40°C or above 105°C. The TE Connectivity substitutes (1-534237-2 and 6-534237-2) extend to -65°C and 125°C, providing full temperature coverage.

Q: Does packaging format affect connector performance?

A: Packaging (bulk versus tube) does not affect electrical or mechanical performance. The SSW-114-01-S-S and 929850-01-14-RB are supplied in bulk format, while the TE Connectivity parts are tube-packaged. Selection should be based on procurement and handling requirements rather than performance considerations.

Q: Are all substitute parts ROHS compliant?

A: All identified substitutes carry ROHS compliance certification. The SSW-114-01-S-S and 6-534237-2 are ROHS3 compliant, while 1-534237-2 and 929850-01-14-RB are RoHS compliant. Both compliance levels meet current regulatory requirements for electronic component manufacturing.