SSW-113-22-G-S-RA Equivalent & Substitute Parts

Part Overview

The SSW-113-22-G-S-RA is a 13-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with through-hole, right-angle mounting. This connector features gold-plated forked contacts, solder termination, and push-pull fastening. The part is currently active in production with 987 units in stock.

Substitute parts are identified when they maintain identical electrical and mechanical specifications across all critical parameters, ensuring direct functional equivalence in circuit applications.

Substiute Parts

SSW-113-22-G-S-RA

Samtec Inc.In Stock: 1087SSW-113-22-G-S-RA Datasheet

Current PartRFQ

SSW-113-02-G-S-RA

Samtec Inc.In Stock: 1168SSW-113-02-G-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-113-02-G-S-RA qualifies as a direct substitute based on equivalence across all specified electrical and mechanical parameters. Substitution is valid when the following criteria are met:

• Connector type: Receptacle
• Position count: 13 positions
• Mating pitch: 0.100" (2.54mm)
• Mounting configuration: Through hole, right angle
• Contact finish: Gold plating
• Current capacity: 4.7A per contact
• Temperature range: -55°C to 125°C
• Insulation material: Liquid Crystal Polymer (LCP)
• Contact material: Phosphor Bronze
• Compliance: ROHS3 Compliant

Both parts share the same base product number (SSW-113) and series designation, confirming their functional interchangeability.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-113-22-G-S-RA and SSW-113-02-G-S-RA are active production parts with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts should be based on inventory availability and supply chain requirements. The SSW-113-02-G-S-RA currently has higher inventory levels (1126 units versus 987 units), which may provide supply chain advantages for high-volume applications.

Frequently Asked Questions (FAQ)

Q: Are SSW-113-22-G-S-RA and SSW-113-02-G-S-RA electrically interchangeable?

A: Yes. Both parts maintain identical electrical specifications including 4.7A per contact current rating, gold contact finish, and phosphor bronze contact material. They are functionally equivalent for circuit applications.

Q: What is the difference between these two part numbers?

A: The parameter comparison table shows all specified electrical and mechanical characteristics are identical. The difference in part numbering reflects Samtec's internal product designation system but does not indicate functional variation.

Q: Can I substitute SSW-113-02-G-S-RA for SSW-113-22-G-S-RA in existing designs?

A: Yes. The parts share identical mating pitch (0.100"), mounting type (through hole, right angle), position count (13), and all electrical ratings. Direct substitution is valid for board-to-board and cable applications.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-113-22-G-S-RA and SSW-113-02-G-S-RA are ROHS3 compliant and meet UL94 V-0 flammability requirements.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 125°C, suitable for industrial and commercial temperature environments.