SSW-113-02-S-D Equivalent & Substitute Parts

Part Overview

The SSW-113-02-S-D is a 26-position rectangular receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This connector features gold-plated mating contacts, through-hole solder termination, and push-pull fastening. The product is currently active and maintains inventory availability of 1029 pieces in new original condition.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part's specifications, enabling direct functional replacement in applications where connector type variation is acceptable.

Substiute Parts

SSW-113-02-S-D

Samtec Inc.In Stock: 1113SSW-113-02-S-D Datasheet

Current PartRFQ

PPPC132LFBN-RC

Sullins Connector SolutionsIn Stock: 11353PPPC132LFBN-RC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-113-02-S-D is determined by the following critical parameters:

• Position Count & Pitch: 26 positions at 0.100" (2.54mm) mating pitch and 0.100" row spacing
• Mounting Configuration: Through-hole solder termination with push-pull fastening
• Contact System: Gold-plated mating surface with square contact geometry
• Electrical Performance: Current and voltage ratings sufficient for the application
• Environmental Compliance: UL94 V-0 flammability rating and RoHS3 compliance
• Connector Interface: Board-to-board or cable-compatible design

The PPPC132LFBN-RC qualifies as a substitute based on matching position count, pitch spacing, mounting type, termination method, and compliance certifications. Functional compatibility is maintained despite differences in connector type (header vs. receptacle) and contact finish specifications, as both employ gold-plated mating surfaces and identical mechanical pitch parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-113-02-S-D and PPPC132LFBN-RC maintain active product status and full RoHS3 compliance, ensuring regulatory alignment for current applications. The main part offers an extended operating temperature range (-55°C to 125°C) and higher current rating (4.7A per contact) compared to the substitute (3A per contact, -40°C to 105°C).

Selection between these parts should be based on application-specific requirements for temperature extremes and current capacity. The SSW-113-02-S-D is appropriate for high-temperature or high-current environments, while the PPPC132LFBN-RC is suitable for standard industrial and commercial applications within its specified operating parameters. Both parts satisfy UL94 V-0 flammability requirements and maintain identical mechanical pitch and position configurations.

Frequently Asked Questions (FAQ)

Q: Can the PPPC132LFBN-RC directly replace the SSW-113-02-S-D in all applications?

A: Direct replacement is possible when application requirements fall within the PPPC132LFBN-RC operating parameters: -40°C to 105°C operating temperature and 3A maximum current per contact. Applications requiring -55°C operation or currents exceeding 3A per contact require the SSW-113-02-S-D.

Q: What is the primary difference between these connectors?

A: The SSW-113-02-S-D is a receptacle connector, while the PPPC132LFBN-RC is a header connector. Both employ identical 0.100" pitch spacing, 26-position configuration, and gold-plated mating contacts. The connector type difference affects mating interface design but not electrical or mechanical compatibility when properly paired with corresponding mating connectors.

Q: Are both parts RoHS3 compliant?

A: Yes, both the SSW-113-02-S-D and PPPC132LFBN-RC are ROHS3 compliant and suitable for applications requiring regulatory compliance with RoHS directives.

Q: What packaging differences exist between these parts?

A: The SSW-113-02-S-D is supplied in bulk packaging, while the PPPC132LFBN-RC is supplied in tray packaging. Packaging format does not affect electrical or mechanical performance.

Q: How do the contact ratings compare?

A: The SSW-113-02-S-D supports 4.7A per contact, while the PPPC132LFBN-RC supports 3A per contact. Applications requiring current capacity above 3A per contact must use the SSW-113-02-S-D.