SSW-113-01-S-S Equivalent & Substitute Parts

Part Overview

The SSW-113-01-S-S is a 13-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated mating contacts, forked contact geometry, and push-pull fastening. The part is currently active in production with 988 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the main part becomes unavailable or when alternative sourcing is required.

Substiute Parts

SSW-113-01-S-S

Samtec Inc.In Stock: 1096SSW-113-01-S-S Datasheet

Current PartRFQ

1-534237-1

TE Connectivity AMP ConnectorsIn Stock: 15711-534237-1 Datasheet

MFR RecommendedRFQ

6-534237-1

TE Connectivity AMP ConnectorsIn Stock: 56086-534237-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-113-01-S-S are identified based on the following critical parameters that determine functional equivalence:

• 13-position receptacle configuration
• 0.100" (2.54mm) mating pitch
• Through-hole solder termination
• Push-pull fastening mechanism
• Gold-plated mating contacts at 30.0µin (0.76µm) thickness
• Black insulation color
• Square contact geometry
• Phosphor bronze contact material

The substitute parts 1-534237-1 and 6-534237-1 (TE Connectivity AMP Connectors, AMPMODU Mod IV series) satisfy these core electrical and mechanical requirements. Both substitutes maintain the same connector type, position count, pitch, mounting method, termination style, and contact finish specifications. Variations in secondary parameters such as insulation material, contact post finish, and compliance certifications are noted in the parameter comparison table.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain active production status and satisfy the core electrical and mechanical requirements for 13-position 0.100" pitch receptacle connectors with gold-plated mating contacts and push-pull fastening.

6-534237-1 (TE Connectivity) is the preferred substitute when RoHS compliance is required. This part is RoHS3 compliant, carries UL94 V-0 flammability certification, and uses tin post finish, aligning with the compliance profile of the original SSW-113-01-S-S. The REACH status is vendor-undefined, requiring clarification from the supplier for applications subject to REACH regulations.

1-534237-1 (TE Connectivity) is suitable for applications where RoHS compliance is not a requirement. This part is RoHS non-compliant and does not specify UL94 flammability rating. The contact post finish is tin-lead, and REACH status is affected, indicating potential regulatory considerations for certain end-use applications.

Both substitutes operate across an extended lower temperature range (-65°C versus -55°C) and feature slightly increased insulation height and contact post length. The current rating of 2A per contact is lower than the original 4.7A specification; applications requiring the full 4.7A rating per contact should not use these substitutes.

Frequently Asked Questions (FAQ)

Q: Can 1-534237-1 and 6-534237-1 be used interchangeably with SSW-113-01-S-S?

A: Both parts satisfy the core connector requirements: 13 positions, 0.100" pitch, through-hole solder termination, push-pull fastening, and gold-plated mating contacts. However, the current rating differs (2A versus 4.7A per contact). Applications operating at or near 4.7A per contact cannot use these substitutes. Insulation material differs (polyester glass-filled versus liquid crystal polymer), which may affect mechanical and thermal properties in specific environments.

Q: What is the difference between 1-534237-1 and 6-534237-1?

A: Both parts are TE Connectivity AMPMODU Mod IV series connectors with identical electrical and mechanical specifications. The primary differences are: 1-534237-1 is RoHS non-compliant with tin-lead post finish and affected REACH status; 6-534237-1 is RoHS3 compliant with tin post finish and vendor-undefined REACH status. 6-534237-1 also specifies UL94 V-0 flammability rating, while 1-534237-1 does not.

Q: Are there packaging differences between these parts?

A: SSW-113-01-S-S is supplied in bulk packaging, while both TE Connectivity substitutes are supplied in tube packaging. Tube packaging may affect handling, storage, and automated assembly processes. Verify compatibility with receiving and assembly procedures before substitution.

Q: What compliance certifications should I verify before substitution?

A: Confirm RoHS, REACH, and UL94 flammability requirements for your application. The original part is ROHS3 compliant and UL94 V-0 rated. 6-534237-1 matches these certifications; 1-534237-1 does not. For applications subject to REACH regulations, clarify the regulatory status of your selected substitute with the supplier.

Q: Can these substitutes handle the same current levels as the original part?

A: No. The original SSW-113-01-S-S is rated at 4.7A per contact, while both TE Connectivity substitutes are rated at 2A per contact. If your application requires 4.7A per contact, these substitutes are not suitable. Verify actual current requirements before proceeding with substitution.

Q: What are the mechanical differences in connector dimensions?

A: Insulation height differs slightly (0.335" original versus 0.340" substitutes), and contact post length is longer on substitutes (0.104" versus 0.115"). These dimensional variations may affect PCB layout, mating clearances, and stacking height in multi-connector assemblies. Verify mechanical fit in your specific application before substitution.