SSW-112-22-S-D-LL Equivalent & Substitute Parts

Part Overview

The SSW-112-22-S-D-LL is a 24-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications. This connector features 0.100" (2.54mm) pitch mating with through-hole solder termination and gold-plated mating contacts. The product is currently active and maintains 815 units in stock. Alternative models are identified to support procurement flexibility, inventory management, and application-specific requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

SSW-112-22-S-D-LL

Samtec Inc.In Stock: 892SSW-112-22-S-D-LL Datasheet

Current PartRFQ

SSW-112-02-S-D-LL

Samtec Inc.In Stock: 858SSW-112-02-S-D-LL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-112-22-S-D-LL is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (24)
• Pitch - mating (0.100" / 2.54mm)
• Number of rows (2)
• Row spacing - mating (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Termination method (Kinked Pin, Solder)
• Contact finish - mating (Gold)
• Contact finish thickness - mating (30.0µin / 0.76µm)
• Current rating (4.7A per Contact)
• Operating temperature range (-55°C ~ 125°C)
• Material flammability rating (UL94 V-0)
• Insulation material (Liquid Crystal Polymer)
• RoHS compliance status (ROHS3 Compliant)

The identified substitute part SSW-112-02-S-D-LL meets all these criteria and is therefore electrically and mechanically interchangeable with the main part number.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-112-22-S-D-LL and SSW-112-02-S-D-LL are active products with full ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts should be based on inventory availability and procurement lead times. The SSW-112-22-S-D-LL maintains higher stock levels at 815 units, while the SSW-112-02-S-D-LL provides an alternative source with 749 units available. Both parts are manufactured by Samtec Inc. and carry identical electrical and mechanical specifications, ensuring direct interchangeability in applications requiring 24-position, 0.100" pitch receptacle connectors with gold-plated contacts and through-hole solder termination.

Frequently Asked Questions (FAQ)

Q: Are SSW-112-22-S-D-LL and SSW-112-02-S-D-LL fully interchangeable?

A: Yes. Both parts are identical in all critical electrical and mechanical parameters, including connector type, position count, pitch, row configuration, termination method, contact finish, current rating, operating temperature range, and material specifications. They are direct substitutes.

Q: What is the difference between these two part numbers?

A: The parts differ only in their internal designation codes (22 versus 02 in the part number). All functional and electrical characteristics are equivalent. The difference reflects Samtec's internal product coding and does not affect performance or compatibility.

Q: Can I use SSW-112-02-S-D-LL as a replacement for SSW-112-22-S-D-LL in existing designs?

A: Yes. No design modifications are required. The substitute part maintains identical mating dimensions, contact spacing, termination method, and electrical ratings.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-112-22-S-D-LL and SSW-112-02-S-D-LL are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: What is the current rating for these connectors?

A: Both parts are rated for 4.7A per contact, supporting applications requiring moderate current distribution across multiple signal or power lines.

Q: What is the operating temperature range?

A: Both connectors operate across -55°C to 125°C, suitable for industrial and commercial applications with extended temperature requirements.