SSW-112-06-S-D Equivalent & Substitute Parts

Part Overview

The SSW-112-06-S-D is a 24-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated mating contacts, push-pull fastening, and operates across -55°C to 125°C. The part is currently active in production with 1034 units in stock and maintains ROHS3 compliance.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main connector's specifications, enabling direct functional replacement in applications where the core performance requirements are met.

Substiute Parts

SSW-112-06-S-D

Samtec Inc.In Stock: 1054SSW-112-06-S-D Datasheet

Current PartRFQ

1-534206-2

TE Connectivity AMP ConnectorsIn Stock: 16341-534206-2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-112-06-S-D is determined by strict alignment of the following core parameters:

• Connector Type: Must be Receptacle
• Position Count: Must be 24 positions
• Mating Pitch: Must be 0.100" (2.54mm)
• Row Configuration: Must be 2 rows with 0.100" (2.54mm) row spacing
• Mounting Method: Must be Through Hole with Solder termination
• Fastening Mechanism: Must be Push-Pull
• Mating Contact Finish: Must be Gold-plated
• Operating Temperature: Must support the required thermal range

The TE Connectivity AMP Connectors part 1-534206-2 meets all core substitution criteria, qualifying as a direct functional equivalent for the SSW-112-06-S-D in applications requiring these specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-112-06-S-D and 1-534206-2 are active production parts with equivalent core electrical and mechanical specifications. Selection between these parts should consider the following factors:

SSW-112-06-S-D (Samtec Inc.): ROHS3 compliant. Supports operating temperature range of -55°C to 125°C. Current rating of 4.7A per contact. Bulk packaging. 1034 units in stock.

1-534206-2 (TE Connectivity AMP Connectors): RoHS non-compliant. Supports extended lower temperature operation at -65°C. Current rating of 2A per contact. Tube packaging. 1581 units in stock. REACH affected.

For applications requiring RoHS3 compliance or higher current capacity per contact, the SSW-112-06-S-D is the appropriate selection. For applications operating at temperatures below -55°C, the 1-534206-2 provides extended thermal range capability. Both parts share identical mating pitch, row configuration, fastening mechanism, and gold contact finish specifications.

Frequently Asked Questions (FAQ)

Q: Can the 1-534206-2 directly replace the SSW-112-06-S-D in existing designs?

A: Both connectors share identical mating pitch (0.100"), position count (24), row configuration (2 rows at 0.100" spacing), mounting method (through-hole solder), and fastening type (push-pull). Physical and electrical compatibility is established for these core parameters. Differences in current rating per contact (4.7A vs. 2A), operating temperature lower limit (-55°C vs. -65°C), and compliance status must be evaluated against specific application requirements.

Q: What are the key differences between these two connectors?

A: The primary differences are current rating per contact (SSW-112-06-S-D: 4.7A; 1-534206-2: 2A), RoHS compliance status (SSW-112-06-S-D: ROHS3 compliant; 1-534206-2: non-compliant), operating temperature lower limit (SSW-112-06-S-D: -55°C; 1-534206-2: -65°C), and packaging format (SSW-112-06-S-D: bulk; 1-534206-2: tube). Contact finish thickness on the post differs (SSW-112-06-S-D: not specified; 1-534206-2: 150.0µin).

Q: Are there packaging considerations when substituting these parts?

A: The SSW-112-06-S-D is supplied in bulk packaging, while the 1-534206-2 is supplied in tube packaging. Procurement and assembly processes may require adjustment based on packaging format compatibility with existing handling and placement equipment.

Q: Which part should be selected for high-current applications?

A: The SSW-112-06-S-D supports 4.7A per contact, compared to 2A per contact for the 1-534206-2. For applications requiring higher current capacity, the SSW-112-06-S-D is the appropriate selection.

Q: What compliance certifications apply to each part?

A: The SSW-112-06-S-D is ROHS3 compliant. The 1-534206-2 is RoHS non-compliant and REACH affected. Applications subject to RoHS or REACH regulations must use the SSW-112-06-S-D.