SSW-111-01-T-P-LL Equivalent & Substitute Parts

Part Overview

The SSW-111-01-T-P-LL is an 11-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features forked contacts with tin plating, kinked pin solder termination, and push-pull fastening. The part is currently active in production with 737 units in stock. Substitute parts are identified when all critical electrical and mechanical parameters remain identical, ensuring direct interchangeability in circuit designs without redesign requirements.

Substiute Parts

SSW-111-01-T-P-LL

Samtec Inc.In Stock: 807SSW-111-01-T-P-LL Datasheet

Current PartRFQ

SSW-111-01-T-S-LL

Samtec Inc.In Stock: 905SSW-111-01-T-S-LL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-111-01-T-P-LL is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (11)
• Mating pitch (0.100" / 2.54mm)
• Contact type (Forked)
• Mounting method (Through Hole)
• Termination style (Kinked Pin, Solder)
• Fastening mechanism (Push-Pull)
• Contact finish (Tin)
• Current rating (4.7A per Contact)
• Operating temperature range (-55°C ~ 105°C)
• Insulation material (Liquid Crystal Polymer)
• Flammability rating (UL94 V-0)
• Regulatory compliance (ROHS3)

The substitute part SSW-111-01-T-S-LL maintains identical values across all these parameters, establishing direct interchangeability.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-111-01-T-P-LL and SSW-111-01-T-S-LL are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts may be based on inventory availability: SSW-111-01-T-P-LL has 737 units in stock, while SSW-111-01-T-S-LL has 798 units in stock. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for equivalent applications. No performance or compatibility differences exist between these parts.

Frequently Asked Questions (FAQ)

Q: Can SSW-111-01-T-S-LL be used as a direct replacement for SSW-111-01-T-P-LL?

A: Yes. All electrical and mechanical parameters are identical, including connector type, position count, pitch, contact configuration, current rating, and operating temperature range. Direct substitution is supported without circuit redesign.

Q: What is the difference between these two part numbers?

A: The provided specifications indicate no functional or electrical differences between SSW-111-01-T-P-LL and SSW-111-01-T-S-LL. Both are 11-position receptacle connectors with 0.100" pitch, tin-plated forked contacts, and identical performance ratings.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-111-01-T-P-LL and SSW-111-01-T-S-LL are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: What is the current handling capacity of these connectors?

A: Each contact is rated for 4.7A, supporting applications requiring moderate current distribution across the 11-position configuration.

Q: What is the operating temperature range?

A: Both parts operate across -55°C to 105°C, suitable for industrial and commercial temperature environments.

Q: Are these connectors suitable for board-to-board and cable applications?

A: Yes. Both parts are designed for board-to-board or cable interconnection with through-hole solder termination and push-pull fastening.