SSW-111-01-T-P Equivalent & Substitute Parts

Part Overview

The SSW-111-01-T-P is an 11-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features tin-plated forked contacts, phosphor bronze construction, and operates across -55°C to 105°C. The part is currently active in production with 978 units in stock. Substitute parts are identified when identical electrical and mechanical specifications are maintained across all critical parameters, ensuring direct interchangeability in applications requiring this connector type.

Substiute Parts

SSW-111-01-T-P

Samtec Inc.In Stock: 1066SSW-111-01-T-P Datasheet

Current PartRFQ

SSW-111-01-T-S

Samtec Inc.In Stock: 1141SSW-111-01-T-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-111-01-T-S qualifies as a direct substitute for the SSW-111-01-T-P based on identical alignment across all critical substitution parameters. Both parts maintain the same connector type (receptacle), position count (11), mating pitch (0.100"), mounting method (through hole), contact configuration (forked), termination approach (solder), contact finishes (tin on both mating and post surfaces), current capacity (4.7A per contact), operating temperature range (-55°C to 105°C), insulation material (LCP), contact material (phosphor bronze), and flammability rating (UL94 V-0). Both parts are ROHS3 compliant and carry active product status. The substitution is valid where these parameters define the functional and mechanical requirements of the application.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-111-01-T-P and SSW-111-01-T-S are active production parts with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts may be based on inventory availability: SSW-111-01-T-P has 978 units in stock, while SSW-111-01-T-S has 1077 units available. Both parts are manufactured by Samtec Inc. under the SSW series and carry identical electrical and mechanical specifications. Either part satisfies applications requiring 11-position receptacle connectors with 0.100" pitch, through-hole mounting, and 4.7A per contact current capacity across the -55°C to 105°C operating range.

Frequently Asked Questions (FAQ)

Q: Can SSW-111-01-T-S replace SSW-111-01-T-P in existing designs? A: Yes. Both parts are identical across all critical parameters including connector type, position count, pitch, mounting method, contact configuration, termination, finishes, current rating, temperature range, materials, and certifications.

Q: What are the key parameters that determine substitutability for this connector? A: Substitutability is determined by matching connector type (receptacle), number of positions (11), mating pitch (0.100"), mounting type (through hole), contact type (forked), termination method (solder), contact finishes (tin), current rating (4.7A per contact), operating temperature range (-55°C to 105°C), insulation material (LCP), contact material (phosphor bronze), and flammability rating (UL94 V-0).

Q: Are there any compliance or certification differences between these parts? A: No. Both parts are ROHS3 compliant and carry UL94 V-0 flammability certification. Both are active production parts from Samtec Inc.

Q: What is the difference between SSW-111-01-T-P and SSW-111-01-T-S? A: These parts are functionally and mechanically identical. The designation difference reflects internal Samtec part numbering; no technical distinction exists between them for application purposes.

Q: Can I use these connectors interchangeably on the same PCB? A: Yes. Both parts have identical through-hole mounting specifications, insulation height (0.335"), contact length (0.104"), and all other mechanical dimensions. They are directly interchangeable in PCB layouts.