SSW-110-23-G-S Equivalent & Substitute Parts

Part Overview

The SSW-110-23-G-S is a 10-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated forked contacts, solder termination, and push-pull fastening. The part is currently active in production with 888 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory requirements necessitate alternative stock sources.

Substiute Parts

SSW-110-23-G-S

Samtec Inc.In Stock: 995SSW-110-23-G-S Datasheet

Current PartRFQ

SSW-110-03-G-S

Samtec Inc.In Stock: 931SSW-110-03-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-110-03-G-S qualifies as a direct substitute for the SSW-110-23-G-S based on identical electrical and mechanical parameters. Both parts share the same core specifications: 10-position receptacle configuration, 0.100" (2.54mm) mating pitch, through-hole solder termination, push-pull fastening, gold contact finish, 4.7A per contact current rating, and -55°C to 125°C operating temperature range. Both connectors utilize Liquid Crystal Polymer insulation material with UL94 V-0 flammability rating and maintain ROHS3 compliance. The substitution is valid across all specified electrical and mechanical criteria.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-110-23-G-S and SSW-110-03-G-S are active production parts with identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and lead time requirements. The SSW-110-23-G-S maintains 888 units in stock, while the SSW-110-03-G-S has 845 units available. Both parts carry ROHS3 compliance and EAR99 export classification. Either part is suitable for applications requiring 10-position, 0.100" pitch receptacle connectors with gold-plated forked contacts, solder termination, and push-pull fastening within the -55°C to 125°C operating range.

Frequently Asked Questions (FAQ)

Q: Can SSW-110-03-G-S be used as a direct replacement for SSW-110-23-G-S?

A: Yes. Both parts are identical in all electrical and mechanical parameters, including connector type, position count, mating pitch, contact configuration, termination method, and operating specifications.

Q: Are there any differences in contact plating between these parts?

A: No. Both parts feature identical gold plating specifications: 20.0µin (0.51µm) on mating contacts and 3.00µin (0.076µm) on post contacts.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SSW-110-23-G-S and SSW-110-03-G-S are ROHS3 compliant with UL94 V-0 flammability rating and carry EAR99 export classification.

Q: What is the current-carrying capacity of these connectors?

A: Both parts are rated for 4.7A per contact, suitable for standard signal and moderate power distribution applications.

Q: Are these connectors suitable for high-temperature applications?

A: Yes. Both parts operate across the -55°C to 125°C temperature range, supporting industrial and automotive environments within this specification.

Q: What mounting method do these connectors use?

A: Both parts utilize through-hole solder termination for permanent PCB mounting with push-pull fastening for mating connector engagement.