SSW-110-02-G-P-RA Equivalent & Substitute Parts

Part Overview

The SSW-110-02-G-P-RA is a 10-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications. This connector features a 0.100" (2.54mm) pitch, through-hole right-angle mounting, and gold-plated contacts rated for 4.7A per contact. The product is active and widely used in applications requiring reliable push-pull fastening and solder termination. Substitute parts are identified when electrical and mechanical parameters remain within the allowed specifications for this rectangular connector category.

Substiute Parts

SSW-110-02-G-P-RA

Samtec Inc.In Stock: 844SSW-110-02-G-P-RA Datasheet

Current PartRFQ

SSW-110-02-G-S-RA

Samtec Inc.In Stock: 1230SSW-110-02-G-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the SSW-110-02-G-P-RA is determined by strict equivalence across the following critical parameters:

• Connector Type & Position Count: Receptacle, 10 positions
• Pitch & Mating Interface: 0.100" (2.54mm) pitch
• Mounting Configuration: Through hole, right-angle orientation
• Contact Specifications: Gold-plated mating surface, forked contact type, square contact shape
• Electrical Performance: 4.7A per contact current rating
• Environmental Compliance: UL94 V-0 flammability rating, ROHS3 compliance, operating temperature -55°C ~ 125°C
• Termination Method: Solder termination with push-pull fastening

The substitute part SSW-110-02-G-S-RA maintains identical specifications across all critical parameters, differing only in the contact post finish designation (S vs. P suffix), which does not affect functional compatibility or electrical performance.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-110-02-G-P-RA and SSW-110-02-G-S-RA are active products from Samtec Inc. with full ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts should be based on availability and supply chain requirements, as both parts meet identical electrical and mechanical specifications for rectangular connector applications requiring 10-position, 0.100" pitch, through-hole right-angle mounting with gold-plated contacts.

The SSW-110-02-G-S-RA currently maintains higher inventory availability (1193 pcs vs. 804 pcs), which may influence procurement decisions for high-volume applications.

Frequently Asked Questions (FAQ)

Q: Can SSW-110-02-G-S-RA be used as a direct replacement for SSW-110-02-G-P-RA?

A: Yes. Both parts are functionally equivalent across all critical parameters including connector type, position count, pitch, mounting configuration, contact specifications, current rating, and environmental compliance. The suffix designation difference does not affect compatibility or performance.

Q: What determines substitution eligibility for SSW series rectangular connectors?

A: Substitution is valid when the following parameters remain constant: 10-position receptacle configuration, 0.100" (2.54mm) mating pitch, through-hole right-angle mounting, gold-plated forked contacts, 4.7A per contact current rating, -55°C ~ 125°C operating temperature range, and UL94 V-0 flammability rating.

Q: Are there any differences in solder termination or PCB footprint between these parts?

A: No differences are specified in the provided parameters. Both parts use identical solder termination and through-hole right-angle mounting configuration.

Q: What is the significance of the part number suffix (P vs. S)?

A: The suffix designation relates to contact post finish specifications. Both variants maintain identical electrical performance and are suitable for the same applications.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-110-02-G-P-RA and SSW-110-02-G-S-RA are ROHS3 compliant and suitable for applications requiring environmental compliance.