SSW-109-22-S-D Equivalent & Substitute Parts

Part Overview

The SSW-109-22-S-D is an 18-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This connector features through-hole solder termination, gold-plated mating contacts, and push-pull fastening. The product is currently active in production with 737 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same connector series, enabling design flexibility and supply chain continuity.

Substiute Parts

SSW-109-22-S-D

Samtec Inc.In Stock: 771SSW-109-22-S-D Datasheet

Current PartRFQ

SSW-109-02-S-D

Samtec Inc.In Stock: 1072SSW-109-02-S-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-109-22-S-D is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (18)
• Pitch spacing (0.100" / 2.54mm)
• Number of rows (2)
• Row spacing (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Termination type (Solder)
• Contact finish at mating surface (Gold)
• Current rating per contact (4.7A)
• Operating temperature range (-55°C ~ 125°C)
• Flammability rating (UL94 V-0)
• RoHS compliance status (ROHS3 Compliant)

The SSW-109-02-S-D meets all these criteria and is classified as a direct substitute within the SSW series.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-109-22-S-D and SSW-109-02-S-D are active production parts manufactured by Samtec Inc. within the SSW series. Both connectors maintain identical electrical and mechanical specifications, including 18-position configuration, 0.100" pitch spacing, 4.7A per contact current rating, and -55°C to 125°C operating temperature range. Both are ROHS3 compliant and carry UL94 V-0 flammability certification.

Selection between these parts should be based on inventory availability and supply chain requirements. The SSW-109-02-S-D currently has higher inventory levels (996 units) compared to the SSW-109-22-S-D (737 units), which may influence procurement decisions for high-volume applications.

Frequently Asked Questions (FAQ)

Q: Are SSW-109-22-S-D and SSW-109-02-S-D electrically interchangeable?

A: Yes. Both connectors share identical electrical specifications including 18 positions, 0.100" pitch, 4.7A per contact current rating, and gold-plated mating contacts. They are suitable for equivalent circuit applications.

Q: Do these connectors have the same physical dimensions?

A: Yes. Both connectors have identical mechanical specifications: 2-row configuration with 0.100" row spacing, 0.335" insulation height, 0.194" contact post length, and through-hole mounting footprint.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-109-22-S-D and SSW-109-02-S-D are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: What is the operating temperature range for these connectors?

A: Both connectors operate across -55°C to 125°C, suitable for industrial and commercial applications.

Q: Can I use these connectors in high-current applications?

A: Both connectors are rated for 4.7A per contact. Total current capacity depends on the number of loaded positions and application requirements.

Q: What termination method is used?

A: Both connectors use solder termination for through-hole PCB mounting with push-pull fastening.