SSW-108-01-G-P-LL Equivalent & Substitute Parts

Part Overview

The SSW-108-01-G-P-LL is an 8-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This connector features gold-plated forked contacts, through-hole mounting with kinked pin solder termination, and push-pull fastening. The part is active in production with 1094 units in current inventory stock.

Equivalent and substitute parts are identified when component availability changes, supply chain disruptions occur, or design flexibility permits alternative sourcing while maintaining electrical and mechanical compatibility within specified parameters.

Substiute Parts

SSW-108-01-G-P-LL

Samtec Inc.In Stock: 1192SSW-108-01-G-P-LL Datasheet

Current PartRFQ

310-13-108-41-001000

Mill-Max Manufacturing Corp.In Stock: 1257310-13-108-41-001000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 310-13-108-41-001000 (Mill-Max Manufacturing Corp.) qualifies as an equivalent based on the following critical parameters:

• Connector Type: Both are receptacles with 8 positions
• Pitch Specification: Both maintain 0.100" (2.54mm) mating pitch
• Row Configuration: Both feature single-row design
• Mounting Method: Both use through-hole mounting
• Fastening Mechanism: Both employ push-pull fastening
• Contact Finish: Both provide gold-plated mating contacts
• Operating Temperature: Both support -55°C ~ 125°C range
• Flammability Compliance: Both meet UL94 V-0 rating
• Regulatory Compliance: Both are ROHS3 compliant

Substitution is valid when these core parameters align, enabling direct replacement in applications where the connector serves the same functional role within the specified environmental and electrical constraints.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-108-01-G-P-LL and 310-13-108-41-001000 are active production components with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts should be based on the following provided specifications:

SSW-108-01-G-P-LL is suitable when:

• Higher current capacity per contact (4.7A) is required
• Forked contact geometry is specified in the design
• Phosphor bronze contact material is preferred
• Liquid Crystal Polymer insulation material is required
• Greater insulation height (0.335") is necessary for PCB layout

310-13-108-41-001000 is suitable when:

• Lower current requirements (3A per contact) are acceptable
• Female socket contact geometry is compatible with the mating connector
• Beryllium copper contact material meets application needs
• PCT/Polyester insulation material is acceptable
• Reduced insulation height (0.110") fits space constraints
• Specified voltage rating (100V, 150VDC) aligns with circuit requirements

Both parts maintain identical pitch spacing, row configuration, mounting method, fastening mechanism, and operating temperature range, ensuring mechanical and electrical compatibility within their respective current and voltage specifications.

Frequently Asked Questions (FAQ)

Q: Can SSW-108-01-G-P-LL be directly replaced with 310-13-108-41-001000?

A: Direct replacement is possible when the application current requirement does not exceed 3A per contact and the mating connector is compatible with female socket contacts. The 0.100" (2.54mm) pitch, through-hole mounting, and push-pull fastening are identical between both parts.

Q: What are the key differences in contact specifications?

A: The SSW-108-01-G-P-LL uses forked phosphor bronze contacts rated at 4.7A per contact, while the 310-13-108-41-001000 uses female socket beryllium copper contacts rated at 3A per contact. The mating contact finish thickness differs: 20.0µin for Samtec versus 30.0µin for Mill-Max.

Q: Are both connectors suitable for the same temperature range?

A: Yes, both parts operate across -55°C ~ 125°C, meeting identical thermal specifications.

Q: What is the impact of different insulation heights?

A: The SSW-108-01-G-P-LL has an insulation height of 0.335" (8.51mm), while the 310-13-108-41-001000 measures 0.110" (2.79mm). This difference affects PCB layout and stacking height considerations. Verify clearance requirements in your specific application.

Q: Do both parts meet the same compliance standards?

A: Yes, both are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: What voltage ratings apply to each connector?

A: The SSW-108-01-G-P-LL does not specify a voltage rating in the provided data. The 310-13-108-41-001000 is rated for 100V and 150VDC. Confirm voltage requirements with your circuit design specifications.

Q: How do the contact post lengths differ?

A: The SSW-108-01-G-P-LL contact post length is 0.104" (2.64mm), while the 310-13-108-41-001000 measures 0.125" (3.18mm). This affects solder joint depth and PCB pad design.