SSW-107-22-G-S-RA Equivalent & Substitute Parts

Part Overview

The SSW-107-22-G-S-RA is a 7-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with through-hole, right-angle mounting. This connector features gold-plated forked contacts, solder termination, and push-pull fastening. The part is currently active in production with 972 units in stock. Substitute parts may be required due to inventory constraints, lead time considerations, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

SSW-107-22-G-S-RA

Samtec Inc.In Stock: 999SSW-107-22-G-S-RA Datasheet

Current PartRFQ

SSW-107-02-G-S-RA

Samtec Inc.In Stock: 1502SSW-107-02-G-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-107-22-G-S-RA is determined by strict equivalence across the following critical parameters:

• Connector Type & Series: Must be Samtec SSW series receptacle connector
• Position Count: Must be 7 positions
• Pitch: Must be 0.100" (2.54mm) mating pitch
• Mounting Configuration: Must be through-hole, right-angle mounting
• Contact Characteristics: Must feature forked contacts with gold mating finish
• Termination Method: Must use solder termination with push-pull fastening
• Electrical Performance: Must maintain 4.7A per contact current rating
• Environmental Compliance: Must meet UL94 V-0 flammability and ROHS3 compliance

The SSW-107-02-G-S-RA meets all substitution criteria and is classified as a direct equivalent within the SSW series.

Parameter Comparison

Engineering Selection Recommendations

The SSW-107-02-G-S-RA is a direct functional equivalent to the SSW-107-22-G-S-RA. Both parts are manufactured by Samtec Inc., share identical electrical and mechanical specifications, and maintain equivalent compliance certifications including ROHS3 and UL94 V-0 flammability ratings. Selection between these parts may be based on inventory availability, lead time requirements, or procurement preferences, as no technical differentiation exists between them within the SSW series.

Frequently Asked Questions (FAQ)

Q: Can SSW-107-02-G-S-RA be used as a direct replacement for SSW-107-22-G-S-RA?

A: Yes. Both connectors are 7-position receptacles with identical mating pitch (0.100"), mounting configuration (through-hole right-angle), contact specifications (forked, gold-plated), and electrical ratings (4.7A per contact). They are functionally interchangeable.

Q: Are there any mechanical compatibility concerns when substituting these parts?

A: No. The connectors share identical insulation height (0.095"), contact length (0.100"), and contact finish specifications. PCB footprints and mating interfaces are equivalent.

Q: Do both parts meet the same environmental and compliance standards?

A: Yes. Both parts are ROHS3 compliant, rated UL94 V-0 for flammability, and operate across the same temperature range (-55°C ~ 125°C). They carry identical ECCN (EAR99) and HTSUS classifications.

Q: What is the difference between these two part numbers?

A: The part numbers differ only in their internal designation codes within the SSW series. No electrical, mechanical, or performance differences exist between SSW-107-22-G-S-RA and SSW-107-02-G-S-RA.

Q: Can I mix these connectors in the same assembly?

A: Yes. Since both connectors are electrically and mechanically identical, they can be used interchangeably within the same design or assembly without modification.