SSW-107-22-F-D Equivalent & Substitute Parts

Part Overview

The SSW-107-22-F-D is a 14-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole connector features gold-plated mating contacts and tin-plated posts, rated for 4.7A per contact across an operating temperature range of -55°C to 125°C. The connector is actively produced and ROHS3 compliant, making it suitable for industrial and commercial applications requiring reliable interconnection in standard 0.1" grid layouts.

Substitute parts are identified when design flexibility, inventory availability, or supply chain considerations require alternative sourcing while maintaining full electrical and mechanical compatibility.

Substiute Parts

SSW-107-22-F-D

Samtec Inc.In Stock: 956SSW-107-22-F-D Datasheet

Current PartRFQ

SSW-107-02-F-D

Samtec Inc.In Stock: 918SSW-107-02-F-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-107-22-F-D is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (14)
• Pitch spacing (0.100" / 2.54mm)
• Number of rows (2)
• Row spacing (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Termination type (Solder)
• Contact finish - mating surface (Gold)
• Current rating per contact (4.7A)
• Operating temperature range (-55°C ~ 125°C)
• Flammability rating (UL94 V-0)
• RoHS compliance status (ROHS3)

The SSW-107-02-F-D meets all substitution criteria, differing only in moisture sensitivity level classification and REACH status documentation, which do not affect electrical or mechanical performance in standard applications.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-107-22-F-D and SSW-107-02-F-D are active products from Samtec Inc. with full ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts may be based on inventory availability, supply chain lead times, or organizational procurement preferences. The SSW-107-02-F-D carries MSL 1 (Unlimited) classification and documented REACH Unaffected status, while the SSW-107-22-F-D does not specify these attributes. For applications with no specific moisture sensitivity or REACH documentation requirements, either part provides equivalent performance and reliability.

Frequently Asked Questions (FAQ)

Q: Can SSW-107-02-F-D be used as a direct replacement for SSW-107-22-F-D?

A: Yes. Both connectors are electrically and mechanically identical across all critical parameters including pitch, contact count, current rating, temperature range, and flammability certification. They are interchangeable in standard board-to-board and cable applications.

Q: What is the difference between these two part numbers?

A: The primary documented differences are moisture sensitivity level classification and REACH status documentation. The SSW-107-02-F-D specifies MSL 1 (Unlimited) and REACH Unaffected status. These classifications do not affect connector performance or compatibility in typical applications.

Q: Are both parts currently available?

A: Yes. Both SSW-107-22-F-D (906 pcs) and SSW-107-02-F-D (860 pcs) are listed as active products with inventory in stock.

Q: Do these connectors require any special handling or storage considerations?

A: Storage and handling requirements are determined by the moisture sensitivity level. Consult the manufacturer's datasheet for specific environmental storage conditions applicable to your selected part number.

Q: What applications are these connectors suitable for?

A: These 14-position, 0.100" pitch receptacle connectors are designed for board-to-board and cable interconnection in applications requiring through-hole solder termination, operating across -55°C to 125°C, with 4.7A per-contact current capacity and UL94 V-0 flammability compliance.