SSW-106-22-G-S-RA Equivalent & Substitute Parts

Part Overview

The SSW-106-22-G-S-RA is a 6-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with through-hole, right-angle mounting. This connector features gold-plated forked contacts, solder termination, and push-pull fastening. The part is active in production with 975 units in stock. Substitute parts may be required due to inventory constraints, application-specific requirements, or design revisions while maintaining electrical and mechanical compatibility.

Substiute Parts

SSW-106-22-G-S-RA

Samtec Inc.In Stock: 998SSW-106-22-G-S-RA Datasheet

Current PartRFQ

SSW-106-02-G-S-RA

Samtec Inc.In Stock: 2339SSW-106-02-G-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-106-22-G-S-RA is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (6)
• Pitch - mating (0.100" / 2.54mm)
• Mounting type (Through Hole, Right Angle)
• Contact type (Forked)
• Termination method (Solder)
• Contact finish (Gold on both mating and post surfaces)
• Insulation material (Liquid Crystal Polymer)
• Current rating (4.7A per contact)
• Operating temperature range (-55°C ~ 125°C)
• Flammability rating (UL94 V-0)
• RoHS compliance status (ROHS3 Compliant)

The SSW-106-02-G-S-RA meets all these criteria and is therefore a direct substitute within the SSW series.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-106-22-G-S-RA and SSW-106-02-G-S-RA are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Inventory availability: SSW-106-02-G-S-RA has higher stock levels (2240 units vs. 975 units)
• Lead time requirements: Either part is suitable for immediate procurement
• Compliance requirements: Both parts meet ROHS3 compliance and UL94 V-0 flammability standards
• Application constraints: No differentiation exists across the provided specifications

Frequently Asked Questions (FAQ)

Q: Can SSW-106-02-G-S-RA be used as a direct replacement for SSW-106-22-G-S-RA?

A: Yes. Both parts are electrically and mechanically equivalent across all specified parameters, including connector type, position count, pitch, mounting configuration, contact materials, and compliance certifications.

Q: What is the difference between these two part numbers?

A: The parts are functionally identical. The difference in part numbers reflects internal Samtec designation. Both maintain the same electrical performance, physical dimensions, and material specifications.

Q: Are there any compatibility concerns when substituting between these parts?

A: No compatibility concerns exist. The parts are interchangeable in applications requiring a 6-position, 0.100" pitch, right-angle receptacle connector with gold-plated forked contacts and solder termination.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SSW-106-22-G-S-RA and SSW-106-02-G-S-RA are ROHS3 compliant and carry UL94 V-0 flammability ratings.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection may be based on inventory availability or supplier preference, as no technical differentiation exists between them.